#define ROUND_UP(x,y) ((((x)+(y)-1)/(y))*(y))
+/* debugging tool - not normally used */
+static void dump_pi (struct plot_info *pi)
+{
+ int i;
+
+ printf("pi:{nr:%d maxtime:%d meandepth:%d maxdepth:%d \n"
+ " minpressure:%d maxpressure:%d endpressure:%d mintemp:%d maxtemp:%d\n",
+ pi->nr, pi->maxtime, pi->meandepth, pi->maxdepth,
+ pi->minpressure, pi->maxpressure, pi->endpressure, pi->mintemp, pi->maxtemp);
+ for (i = 0; i < pi->nr; i++)
+ printf(" entry[%d]:{same_cylinder:%d cylinderindex:%d sec:%d pressure:{%d,%d}\n"
+ " temperature:%d depth:%d smoothed:%d}\n",
+ i, pi->entry[i].same_cylinder, pi->entry[i].cylinderindex, pi->entry[i].sec,
+ pi->entry[i].pressure[0], pi->entry[i].pressure[1],
+ pi->entry[i].temperature, pi->entry[i].depth, pi->entry[i].smoothed);
+ printf(" }\n");
+}
+
/*
* When showing dive profiles, we scale things to the
* current dive. However, we don't scale past less than
cairo_show_text(cr, buffer);
}
+struct ev_select {
+ char *ev_name;
+ gboolean plot_ev;
+};
+static struct ev_select *ev_namelist;
+static int evn_allocated;
+static int evn_used;
+
+void evn_foreach(void (*callback)(const char *, int *, void *), void *data)
+{
+ int i;
+
+ for (i = 0; i < evn_used; i++) {
+ callback(ev_namelist[i].ev_name, &ev_namelist[i].plot_ev, data);
+ }
+}
+
+void remember_event(const char *eventname)
+{
+ int i=0, len;
+
+ if (!eventname || (len = strlen(eventname)) == 0)
+ return;
+ while (i < evn_used) {
+ if (!strncmp(eventname,ev_namelist[i].ev_name,len))
+ return;
+ i++;
+ }
+ if (evn_used == evn_allocated) {
+ evn_allocated += 10;
+ ev_namelist = realloc(ev_namelist, evn_allocated * sizeof(struct ev_select));
+ if (! ev_namelist)
+ /* we are screwed, but let's just bail out */
+ return;
+ }
+ ev_namelist[evn_used].ev_name = strdup(eventname);
+ ev_namelist[evn_used].plot_ev = TRUE;
+ evn_used++;
+}
+
static void plot_one_event(struct graphics_context *gc, struct plot_info *pi, struct event *event, const text_render_options_t *tro)
{
int i, depth = 0;
int x,y;
+ /* is plotting this event disabled? */
+ if (event->name) {
+ for (i = 0; i < evn_used; i++) {
+ if (! strcmp(event->name, ev_namelist[i].ev_name)) {
+ if (ev_namelist[i].plot_ev)
+ break;
+ else
+ return;
+ }
+ }
+ }
for (i = 0; i < pi->nr; i++) {
struct plot_data *data = pi->entry + i;
if (event->time.seconds < data->sec)
static const text_render_options_t deep = {14, 1.0, 0.2, 0.2, CENTER, TOP};
static const text_render_options_t shallow = {14, 1.0, 0.2, 0.2, CENTER, BOTTOM};
int i;
+ int last = -1;
for (i = 0; i < pi->nr; i++) {
struct plot_data *entry = pi->entry + i;
if (entry->depth < 2000)
continue;
- if (entry == entry->max[2])
+ if ((entry == entry->max[2]) && entry->depth != last) {
render_depth_sample(gc, entry, &deep);
+ last = entry->depth;
+ }
- if (entry == entry->min[2])
+ if ((entry == entry->min[2]) && entry->depth != last) {
render_depth_sample(gc, entry, &shallow);
+ last = entry->depth;
+ }
+
+ if (entry->depth != last)
+ last = -1;
}
}
static void plot_depth_profile(struct graphics_context *gc, struct plot_info *pi)
{
- int i;
+ int i, incr;
cairo_t *cr = gc->cr;
int sec, depth;
struct plot_data *entry;
int maxtime, maxdepth, marker;
+ int increments[4] = { 5*60, 10*60, 15*60, 30*60 };
/* Get plot scaling limits */
maxtime = get_maxtime(pi);
maxdepth = get_maxdepth(pi);
- /* Time markers: every 5 min */
+ /* Time markers: at most every 5 min, but no more than 12 markers
+ * and for convenience we do 5, 10, 15 or 30 min intervals.
+ * This allows for 6h dives - enough (I hope) for even the craziest
+ * divers - but just in case, for those 8h depth-record-breaking dives,
+ * we double the interval if this still doesn't get us to 12 or fewer
+ * time markers */
+ i = 0;
+ while (maxtime / increments[i] > 12 && i < 4)
+ i++;
+ incr = increments[i];
+ while (maxtime / incr > 12)
+ incr *= 2;
+
gc->leftx = 0; gc->rightx = maxtime;
gc->topy = 0; gc->bottomy = 1.0;
- for (i = 5*60; i < maxtime; i += 5*60) {
+ set_source_rgba(gc, 1, 1, 1, 0.5);
+ for (i = incr; i < maxtime; i += incr) {
move_to(gc, i, 0);
line_to(gc, i, 1);
}
+ cairo_stroke(cr);
+
+ /* now the text on every second time marker */
+ text_render_options_t tro = {10, 0.2, 1.0, 0.2, CENTER, TOP};
+ for (i = incr; i < maxtime; i += 2 * incr)
+ plot_text(gc, &tro, i, 1, "%d", i/60);
/* Depth markers: every 30 ft or 10 m*/
gc->leftx = 0; gc->rightx = 1.0;
static void plot_single_temp_text(struct graphics_context *gc, int sec, int mkelvin)
{
- int deg;
+ double deg;
const char *unit;
static const text_render_options_t tro = {12, 0.2, 0.2, 1.0, LEFT, TOP};
- temperature_t temperature = { mkelvin };
- if (output_units.temperature == FAHRENHEIT) {
- deg = to_F(temperature);
- unit = UTF8_DEGREE "F";
- } else {
- deg = to_C(temperature);
- unit = UTF8_DEGREE "C";
- }
- plot_text(gc, &tro, sec, temperature.mkelvin, "%d%s", deg, unit);
+ deg = get_temp_units(mkelvin, &unit);
+
+ plot_text(gc, &tro, sec, mkelvin, "%d%s", (int)(deg + 0.5), unit);
}
static void plot_temperature_text(struct graphics_context *gc, struct plot_info *pi)
plot_pressure_helper(gc, pi, INTERPOLATED_PR);
}
-static int mbar_to_PSI(int mbar)
-{
- pressure_t p = {mbar};
- return to_PSI(p);
-}
-
static void plot_pressure_value(struct graphics_context *gc, int mbar, int sec,
int xalign, int yalign)
{
int pressure;
const char *unit;
- switch (output_units.pressure) {
- case PASCAL:
- pressure = mbar * 100;
- unit = "pascal";
- break;
- case BAR:
- pressure = (mbar + 500) / 1000;
- unit = "bar";
- break;
- case PSI:
- pressure = mbar_to_PSI(mbar);
- unit = "psi";
- break;
- }
+ pressure = get_pressure_units(mbar, &unit);
text_render_options_t tro = {10, 0.2, 1.0, 0.2, xalign, yalign};
plot_text(gc, &tro, sec, mbar, "%d %s", pressure, unit);
}
if (!get_cylinder_pressure_range(gc, pi))
return;
- /* only loop over the actual events from the dive computer */
- for (i = 2; i < pi->nr - 2; i++) {
+ /* only loop over the actual events from the dive computer
+ * plus the second synthetic event at the start (to make sure
+ * we get "time=0" right) */
+ for (i = 1; i < pi->nr; i++) {
entry = pi->entry + i;
if (!entry->same_cylinder) {
for (cyl = 0; cyl < MAX_CYLINDERS; cyl++) {
cur_pr[cyl] = track_pr[cyl]->start;
}
- for (i = 0; i < dive->samples; i++) {
- entry = pi->entry + i + 2;
+
+ /* The first two are "fillers", but in case we don't have a sample
+ * at time 0 we need to process the second of them here */
+ for (i = 1; i < pi->nr; i++) {
+ entry = pi->entry + i;
if (SENSOR_PRESSURE(entry)) {
cur_pr[entry->cylinderindex] = SENSOR_PRESSURE(entry);
} else {
INTERPOLATED_PRESSURE(entry) =
cur_pr[entry->cylinderindex] + cur_pt * magic;
cur_pr[entry->cylinderindex] = INTERPOLATED_PRESSURE(entry);
- }
+ } else
+ INTERPOLATED_PRESSURE(entry) = cur_pr[entry->cylinderindex];
+ }
+ }
+}
+
+static int get_cylinder_index(struct dive *dive, struct event *ev)
+{
+ int i;
+
+ /*
+ * Try to find a cylinder that matches the O2 percentage
+ * in the gas change event 'value' field.
+ *
+ * Crazy suunto gas change events. We really should do
+ * this in libdivecomputer or something.
+ */
+ for (i = 0; i < MAX_CYLINDERS; i++) {
+ cylinder_t *cyl = dive->cylinder+i;
+ int o2 = (cyl->gasmix.o2.permille + 5) / 10;
+ if (o2 == ev->value)
+ return i;
+ }
+
+ return 0;
+}
+
+static struct event *get_next_gaschange(struct event *event)
+{
+ while (event) {
+ if (!strcmp(event->name, "gaschange"))
+ return event;
+ event = event->next;
+ }
+ return event;
+}
+
+static int set_cylinder_index(struct plot_info *pi, int i, int cylinderindex, unsigned int end)
+{
+ while (i < pi->nr) {
+ struct plot_data *entry = pi->entry+i;
+ if (entry->sec > end)
+ break;
+ if (entry->cylinderindex != cylinderindex) {
+ entry->cylinderindex = cylinderindex;
+ entry->pressure[0] = 0;
}
+ i++;
}
+ return i;
+}
+
+static void check_gas_change_events(struct dive *dive, struct plot_info *pi)
+{
+ int i = 0, cylinderindex = 0;
+ struct event *ev = get_next_gaschange(dive->events);
+
+ if (!ev)
+ return;
+
+ do {
+ i = set_cylinder_index(pi, i, cylinderindex, ev->time.seconds);
+ cylinderindex = get_cylinder_index(dive, ev);
+ ev = get_next_gaschange(ev->next);
+ } while (ev);
+ set_cylinder_index(pi, i, cylinderindex, ~0u);
+}
+
+/* for computers that track gas changes through events */
+static int count_gas_change_events(struct dive *dive)
+{
+ int count = 0;
+ struct event *ev = get_next_gaschange(dive->events);
+
+ while (ev) {
+ count++;
+ ev = get_next_gaschange(ev->next);
+ }
+ return count;
}
/*
* sides, so that you can do end-points without having to worry
* about it.
*/
-static struct plot_info *create_plot_info(struct dive *dive)
+static struct plot_info *create_plot_info(struct dive *dive, int nr_samples, struct sample *dive_sample)
{
int cylinderindex = -1;
int lastdepth, lastindex;
- int i, nr = dive->samples + 4, sec, cyl;
- size_t alloc_size = plot_info_size(nr);
+ int i, pi_idx, nr, sec, cyl;
+ size_t alloc_size;
struct plot_info *pi;
pr_track_t *track_pr[MAX_CYLINDERS] = {NULL, };
pr_track_t *pr_track, *current;
gboolean missing_pr = FALSE;
- struct plot_data *entry;
+ struct plot_data *entry = NULL;
+ struct event *ev;
+ /* we want to potentially add synthetic plot_info elements for the gas changes */
+ nr = nr_samples + 4 + 2 * count_gas_change_events(dive);
+ alloc_size = plot_info_size(nr);
pi = malloc(alloc_size);
if (!pi)
return pi;
memset(pi, 0, alloc_size);
pi->nr = nr;
+ pi_idx = 2; /* the two extra events at the start */
+ /* check for gas changes before the samples start */
+ ev = get_next_gaschange(dive->events);
+ while (ev && ev->time.seconds < dive_sample->time.seconds) {
+ entry = pi->entry + pi_idx;
+ entry->sec = ev->time.seconds;
+ entry->depth = 0; /* is that always correct ? */
+ pi_idx++;
+ ev = get_next_gaschange(ev->next);
+ }
+ if (ev && ev->time.seconds == dive_sample->time.seconds) {
+ /* we already have a sample at the time of the event */
+ ev = get_next_gaschange(ev->next);
+ }
sec = 0;
lastindex = 0;
lastdepth = -1;
- for (i = 0; i < dive->samples; i++) {
+ for (i = 0; i < nr_samples; i++) {
int depth;
- struct sample *sample = dive->sample+i;
-
- entry = pi->entry + i + 2;
- sec = entry->sec = sample->time.seconds;
+ int delay = 0;
+ struct sample *sample = dive_sample+i;
+
+ entry = pi->entry + i + pi_idx;
+ while (ev && ev->time.seconds < sample->time.seconds) {
+ /* insert two fake plot info structures for the end of
+ * the old tank and the start of the new tank */
+ entry->sec = ev->time.seconds;
+ (entry+1)->sec = ev->time.seconds + 1;
+ /* we need a fake depth - let's interpolate */
+ if (i) {
+ entry->depth = sample->depth.mm -
+ (sample->depth.mm - (sample-1)->depth.mm) / 2;
+ } else
+ entry->depth = sample->depth.mm;
+ (entry+1)->depth = entry->depth;
+ pi_idx += 2;
+ entry = pi->entry + i + pi_idx;
+ ev = get_next_gaschange(ev->next);
+ }
+ if (ev && ev->time.seconds == sample->time.seconds) {
+ /* we already have a sample at the time of the event
+ * just add a new one for the old tank and delay the
+ * real even by one second (to keep time monotonous) */
+ entry->sec = ev->time.seconds;
+ entry->depth = sample->depth.mm;
+ pi_idx++;
+ entry = pi->entry + i + pi_idx;
+ ev = get_next_gaschange(ev->next);
+ delay = 1;
+ }
+ sec = entry->sec = sample->time.seconds + delay;
depth = entry->depth = sample->depth.mm;
entry->cylinderindex = sample->cylinderindex;
SENSOR_PRESSURE(entry) = sample->cylinderpressure.mbar;
entry->temperature = sample->temperature.mkelvin;
if (depth || lastdepth)
- lastindex = i+2;
+ lastindex = i + pi_idx;
lastdepth = depth;
if (depth > pi->maxdepth)
pi->maxdepth = depth;
}
+ entry = pi->entry + i + pi_idx;
+ /* are there still unprocessed gas changes? that would be very strange */
+ while (ev) {
+ entry->sec = ev->time.seconds;
+ entry->depth = 0; /* why are there gas changes after the dive is over? */
+ pi_idx++;
+ entry = pi->entry + i + pi_idx;
+ ev = get_next_gaschange(ev->next);
+ }
+ nr = nr_samples + pi_idx - 2;
+ check_gas_change_events(dive, pi);
for (cyl = 0; cyl < MAX_CYLINDERS; cyl++) /* initialize the start pressures */
track_pr[cyl] = pr_track_alloc(dive->cylinder[cyl].start.mbar, -1);
- current = track_pr[dive->sample[0].cylinderindex];
- for (i = 0; i < dive->samples; i++) {
- entry = pi->entry + i + 2;
+ current = track_pr[pi->entry[2].cylinderindex];
+ for (i = 0; i < nr + 1; i++) {
+ entry = pi->entry + i + 1;
entry->same_cylinder = entry->cylinderindex == cylinderindex;
cylinderindex = entry->cylinderindex;
missing_pr |= !SENSOR_PRESSURE(entry);
}
- current->t_end = entry->sec;
+ if (entry)
+ current->t_end = entry->sec;
+
for (cyl = 0; cyl < MAX_CYLINDERS; cyl++) { /* initialize the end pressures */
int pr = dive->cylinder[cyl].end.mbar;
if (pr && track_pr[cyl]) {
pr_track->end = pr;
}
}
- if (lastdepth)
- lastindex = i + 2;
/* Fill in the last two entries with empty values but valid times */
- i = dive->samples + 2;
+ i = nr + 2;
pi->entry[i].sec = sec + 20;
pi->entry[i+1].sec = sec + 40;
+ /* the number of actual entries - some computers have lots of
+ * depth 0 samples at the end of a dive, we want to make sure
+ * we have exactly one of them at the end */
pi->nr = lastindex+1;
+ while (pi->nr <= i+2 && pi->entry[pi->nr-1].depth > 0)
+ pi->nr++;
pi->maxtime = pi->entry[lastindex].sec;
pi->endpressure = pi->minpressure = dive->cylinder[0].end.mbar;
}
for (cyl = 0; cyl < MAX_CYLINDERS; cyl++)
list_free(track_pr[cyl]);
+ if (0) /* awesome for debugging - not useful otherwise */
+ dump_pi(pi);
return analyze_plot_info(pi);
}
void plot(struct graphics_context *gc, cairo_rectangle_int_t *drawing_area, struct dive *dive)
{
- struct plot_info *pi = create_plot_info(dive);
+ struct plot_info *pi;
+ static struct sample fake[4];
+ struct sample *sample = dive->sample;
+ int nr = dive->samples;
+
+ if (!nr) {
+ int duration = dive->duration.seconds;
+ int maxdepth = dive->maxdepth.mm;
+ sample = fake;
+ fake[1].time.seconds = duration * 0.05;
+ fake[1].depth.mm = maxdepth;
+ fake[2].time.seconds = duration * 0.95;
+ fake[2].depth.mm = maxdepth;
+ fake[3].time.seconds = duration * 1.00;
+ nr = 4;
+ }
+
+ pi = create_plot_info(dive, nr, sample);
cairo_translate(gc->cr, drawing_area->x, drawing_area->y);
cairo_set_line_width(gc->cr, 2);
projects / ext / subsurface.git / blobdiff