Subsurface 1.2 User Manual
==========================
Jacco van_Koll <jko@haringstad.com>
-v0.0.7, January 2021
+v0.0.7, January 2012
:Author Initials: JKO
:toc:
:icons:
On Sunday Oct 23, 2011 you made a dive.
In the log line of this dive, you see the following information:
-
- #::
- 12 Dive number
- Date::
- Sun, Oct 23, 2011 10:50 Date and time of your dive
- *::
- Your rating (none at this time)
- m::
- 12.8 Your maximum depth in meters
- min::
- 31:20 Your dive-time in minutes and seconds
- Deg. C::
- 13.0 Lowest water temperature during your dive
- Cyl::
- Your used cylinder (none at this time)
- O2%::
- air What type of mixture
- SAC::
- SAC (none at this time)
- Location::
- Where you performed your dive (empty)
+[width="70%",cols="<5%,10%,<20%,<65%",grid="none",frame="none",style="monospaced"]
+|===============================================================================
+|| # | 12 | Dive number
+|| Date | Sun, Oct 23, 2011 10:50 | Date and time of your dive
+|| * | | Your rating (none at this time)
+|| m | 12.8 | Your maximum depth in meters
+|| min | 31:20 | Your dive-time in minutes and seconds
+|| Deg. C | 13.0 | Lowest water temperature during your dive
+|| Cyl | | Your used cylinder (none at this time)
+|| O2% | air | What type of mixture
+|| SAC | | SAC (none at this time)
+|| Location | | Where you performed your dive (empty)
+|===============================================================================
As you can see, some information is already there because it is
retrieved from your divecomputer. Some information is waiting for
opens. Now you can add information that is missing. Let start with
completing the example:
-You double clicked on dive #12, as described in 5. Viewing and
-completing your logs. The Dive Info window pops up and you will see
+You double clicked on dive #12, as described in <<S_ViewingLogs,Viewing and
+completing your logs>>. The Dive Info window pops up and you will see
the following:
-
- - Location: An input where you can enter your new location, or you can choose with the pull-down previous locations
- - Dive Master: An input where you can enter the name of your Dive Master, or you can choose with the pull-down a previous name
- - Buddy: An input where you can enter het name of you Buddy, or you can choose with the pull-down a previous name
- - Rating: A pull-down where you can rate your dive.
- - Notes: A free input where you can enter information about your dive. What you've seen, etc.
+[horizontal]
+ *Location*:: An input where you can enter your new location, or you can choose with the pull-down previous locations
+ *Dive Master*:: An input where you can enter the name of your Dive Master, or you can choose with the pull-down a previous name
+ *Buddy*:: An input where you can enter het name of you Buddy, or you can choose with the pull-down a previous name
+ *Rating*:: A pull-down where you can rate your dive.
+ *Notes*:: A free input where you can enter information about your dive. What you've seen, etc.
In this example we use the following information:
-
- - Location: Oostvoornse Meer
- - Dive Master: S. de Vries
- - Buddy: S. de Vries
- - Rating: 3 stars
- - Notes: First dive here. Good visibility. Did see the concrete poles, some crab and fish. Very nice and easy dive.
- Made movie with 'headcam'.
+[horizontal]
+ *Location*:: Oostvoornse Meer
+ *Dive Master*:: S. de Vries
+ *Buddy*:: S. de Vries
+ *Rating*:: 3 stars
+ *Notes*:: First dive here. Good visibility. Did see the concrete poles, some crab and fish. Very nice and easy dive. +
+ Made movie with headcam.
Now don't press ok yet!
popup. This popup gives you the following:
- Cylinder: Pull-down where you can choose your Cylinder, or add your own
- - Size: The volume if not 'filled'
+ - Size: The volume if not `filled'
- Pressure: The maximum pressure of this Cylinder
- Optional:
* Start Pressure: What was the pressure starting the dive
I am a diver in The Netherlands, using the Metric System. Therefor, I
go to the menu File, choose Preferences here. In the Units section, I
-use the folowing:
+use the following:
- Depth: Meter
- Pressure: Bar
this program. You don't have to type all information by hand into
Subsurface, because you can import your divelogs from JDivelog.
-JDivelog stores its information into files with the extention of .jlb.
+JDivelog stores its information into files with the extension of .jlb.
These .jlb contain all the information that has been stored, except your
images in xml format.
- Type of dive
- Dive activity
-Alternatively, you can start subsurface with the --import comand line
+Alternatively, you can start subsurface with the --import command line
which will have the same effect:
subsurface MyDives.xml --import JDivelogDives.jlb
The assumption is that you have exported your Divelogs.SDE on a Windows
system. You have to transfer the file to a location where you can read it
-from within your Linux environment. You can use file-tranfer, shared
+from within your Linux environment. You can use file-transfer, shared
storage or an USB storage device to do this.
The example uses an USB storage:
- Save:: Save your current divelogs or changes you made to your divelogs
- Print:: Print your current divelog profiles and information about the dive
- Import:: Import your dives from your divecomputer, JDivelogs or Suunto Divemanager
- - Preferences:: Set your preferences as described in chapter 10
+ - Preferences:: Set your preferences as described in <<S_SettingUpPreferences,chapter 10>>
- Quit:: Quit the program
The Log menu
projects / ext / subsurface.git / blobdiff