Dirk Hohndel [Wed, 14 Dec 2011 19:22:12 +0000 (11:22 -0800)]
Improve Makefile for MacOS
Some macs appear to need "-framework CoreFoundation" added to the linking
step, others (which appear to have the exact same OS and tools installed),
don't. But as it doesn't appeart to hurt, I unconditionally add this.
Switched to using pkgconfig to find libdivecomputer on the Mac.
Tried to clean up the Makefile a bit
Signed-off-by: Dirk Hohndel <dirk@hohndel.org> Acked-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Dirk Hohndel [Wed, 14 Dec 2011 04:34:56 +0000 (20:34 -0800)]
Add reasonable default device names for divecomputer import
So far we hard coded /dev/ttyUSB0 - which is a good starting point in
Linux but not so useful on Windows or MacOS. This was now moved into one
of our OS helper functions with (somewhat) reasonable defaults.
Dirk Hohndel [Tue, 13 Dec 2011 22:34:42 +0000 (14:34 -0800)]
More intuitive label for "not saving" when exiting
Right now the options are "Save" and "Cancel". I wrote that code and it
always bugged me - "Cancel" could mean that I want to cancel the the whole
operation, i.e. that I don't want to quit after all. Showing "Save" and
"No" seems much more logical.
Linus Torvalds [Mon, 12 Dec 2011 19:20:36 +0000 (11:20 -0800)]
Merge branch 'forlinus' of git://git.hohndel.org/subsurface
* 'forlinus' of git://git.hohndel.org/subsurface:
Small improvement to plot info debugging code
Add three more trimix test dives
Make test dive 15 a bit more useful
Two test dives I added a couple of months ago
Add libxslt to Windows packaging file
Linus Torvalds [Mon, 12 Dec 2011 17:24:47 +0000 (09:24 -0800)]
Pack the star rating on a line of its own
Packing it next to the divemaster/buddy information may work great on a
big screen with lots of pixes, but it makes the minimum window size way
wide for a small screen. So don't do it.
Linus Torvalds [Mon, 12 Dec 2011 17:20:22 +0000 (09:20 -0800)]
divelist: show/sort nitrox dive oxygen percentage as a range
If you are diving multiple nitrox cylinders, we now show them as a range
instead of just the max. We'll still sort by max O2 (and for the same
max, by min O2).
So now with trimix dives, we'll show the bottom gas (we assume that
"highest He percentage" is that bottom gas), for nitrox dives we'll show
the range of Oxygen percentage, and for all-air dives we'll show just
"air".
For simple nitrox dives (only a single mix), we'll obviously show just
that single percentage. This should hopefully conclude the whole "show
multiple cylinders in dive list" mess.
Linus Torvalds [Mon, 12 Dec 2011 05:28:18 +0000 (21:28 -0800)]
Make the dive gas record the single highest mix
.. using the regular sorting rules: sort by Helium content first, Oxygen
content second. Air always sorts last (even behind the theoretical
hypoxic Nitrox that nobody sane would use).
This is what Don Kinney implies would be the natural thing for a trimix
diver.
Linus Torvalds [Sun, 11 Dec 2011 22:38:58 +0000 (14:38 -0800)]
Add capability of custom sorts to divelist columns
.. and use this for the nitrox column, which can now be more complex
than just a single number.
The rule for the "nitrox" column is now:
- we look up the highest Oxygen and Helium mix for the dive
(Note: we look them up independently, so if you have a EAN50 deco
bottle, and a 20% Helium low-oxygen bottle for the deep portion, then
we'll consider the dive to be a "50% Oxygen, 20% Helium" dive, even
though you obviously never used that combination at the same time)
- we sort by Helium first, Oxygen second. So a dive with a 10% Helium
mix is considered to be "stronger" than a 50% Nitrox mix.
- If Helium is non-zero, we show "O2/He", otherwise we show just "O2"
(or "air"). So "21/20" means "21% oxygen, 20% Helium", while "40"
means "Ean 40".
- I got rid of the decimals. We save them, and you can see them in the
dive equipment details, but for the dive list we just use rounded
percentages.
Let's see how many bugs I introduced. I don't actually have any trimix
dives, but I edited a few for (very limited) testing.
Linus Torvalds [Sun, 11 Dec 2011 20:03:55 +0000 (12:03 -0800)]
Add the "Common European Cylinders" as per Henrik
This is Henrik's list of common metric sized cylinders, although my
experience differs from this one. In Cyprus, I was diving double 12L
cylinders, but they were 200 bar, not the 232 bar ones Henrik has on the
list.
Also, I really think we should just have a checkbox for "double" instead
of naming them explicitly like this. Henrik does have the 12L 200 bar
ones in his singles list.
But as a stop-gap, I'm just taking the values from Henrik's patch, but
converted to the new cleaned-up reference tank model setup.
Based-on-patch-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 11 Dec 2011 19:54:17 +0000 (11:54 -0800)]
Clean up reference tank information table
This makes the reference tanks ("struct tank_info") use a saner format
which specifies explicitly whether the size is in ml or cubic feet, and
whether the pressure is in psi or bar.
So instead of having magic rules ("size is in cuft if < 1000, otherwise
mliter"), just set the size explicitly:
and then the code can just convert to standard measurements without any
odd rules, and the initialization table becomes self-explanatory too.
This is in preparation for doing the metric tanks with pressure: Henrik
Aronsen sent a really ugly patch using the previous setup, I just
couldn't stand the additional hackery.
Linus Torvalds [Sun, 11 Dec 2011 19:40:17 +0000 (11:40 -0800)]
Make the cylinder table columns unsortable
They were never intended to be sortable, but using common code with the
dive list picked up that "sort by index" thing by mistake.
If we really want to be able to sort cylinders by O2 percentage (which
really doesn't seem to make much sense, considering that you usually
have just one or two cylinders) we will need to also handle the case of
editing the (differently sorted) cylinder table. Which we don't do now.
Reported-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 11 Dec 2011 19:09:37 +0000 (11:09 -0800)]
Allow editing of Helium values in cylinder info
Henrik Aronsen points out that we've not made it possible to edit the He
percentages for trimix diving. It's easy enough to do, I just didn't
have any dives that needed it myself. So here goes.
Reported-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 9 Dec 2011 17:52:59 +0000 (09:52 -0800)]
Use common helper function for the "no cylinder info" case
Miika fixed the statistics code that didn't properly check for the "no
cylinder info" case - this cleans it up and just uses the helper
function in equipment.c.
Rename the helper to be slightly better named while at it.
Dirk Hohndel [Wed, 7 Dec 2011 19:58:16 +0000 (11:58 -0800)]
Add typical 0 to 5 star rating for dives
This works ok-ish, but doesn't allow us to click on the stars and edit
them in the divelist, which a user might expect to be able to do - in
most "star rating UIs" you simply click on the n-th star to set that
rating. Here you need to edit the dive and pick the rating from a drop
down menu.
Minor oddity: you can actually (if you force it) write anything you want
into the star rating. But anything that isn't one of the predefined
strings simply results in a zero star rating.
Overall the UI feels a bit... forced. But I think this is quite useful
anyway.
Linus Torvalds [Tue, 6 Dec 2011 21:00:01 +0000 (13:00 -0800)]
Add shorthand actions for showing just one of the panes
Currently just tied to F1-F4 (for divelist, profile, info, and "all
three" respectively), which is just crazy. But using "ctrl-P" for
"Profile" isn't sane either, that's the standard printer keyboard
shortcut. So what would be good keyboard shortcuts for these things?
I also wonder how I can get gtk to shut up about the fact that a pane
becomes too small for the contents of that pane? We very much want to do
that, and it's very intentional. Gtk does the right thing apart from
the whining (and apart from the visually ugly part of a widget that
doesn't fit, but making it pretty doesn't really seem possible).
The profile colors were defined all over the place, so I put them all in one spot. I'm unsure if this is the best solution to that problem, but I guess it's a step in the right direction.
Signed-Off-By: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Linus Torvalds [Sun, 27 Nov 2011 20:07:49 +0000 (12:07 -0800)]
Merge branch 'windows-fixes' of git://git.hohndel.org/subsurface
* 'windows-fixes' of git://git.hohndel.org/subsurface:
fix mingw-win32 specific warnings in libdivecomputer.c
Fix mingw-make.sh to find correct xslt-config
Dirk Hohndel [Sun, 27 Nov 2011 17:10:37 +0000 (09:10 -0800)]
fix mingw-win32 specific warnings in libdivecomputer.c
1) since %lld is not defined in the MSVC runtime, use
the portable PRId64 macro from inttypes.h for 64bit integers
notice in inttypes.h from mingw-win32:
/* 7.8.1 Macros for format specifiers
*
* MS runtime does not yet understand C9x standard "ll"
* length specifier. It appears to treat "ll" as "l".
* The non-standard I64 length specifier causes warning in GCC,
* but understood by MS runtime functions.
*/
2) include unistd.h to disable warning:
warning: implicit declaration of function 'usleep'
Lubomir's code then caused a warning building natively under Linux, which
I fixed as well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org> Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Linus Torvalds [Sat, 26 Nov 2011 05:51:34 +0000 (21:51 -0800)]
Merge branch 'windows-fixes' of git://git.hohndel.org/subsurface
* 'windows-fixes' of git://git.hohndel.org/subsurface:
Add more typecasts for Windows`
Fix the Windows preferences support
Update the Windows installer creation script
Dirk Hohndel [Sat, 26 Nov 2011 04:09:01 +0000 (20:09 -0800)]
Add more typecasts for Windows`
This is based on an older patch by Lubomir I. Ivanov <neolit123@gmail.com>
which no longer applies due to the refactoring of the registry setting
code.
It takes care of all of the casts between actual C types and the Windows
specific types that the Windows API functions expect. It also adds some
comments to the overloading of "value" in our subsurface_set_conf function.
Dirk Hohndel [Sat, 26 Nov 2011 03:48:53 +0000 (19:48 -0800)]
Fix the Windows preferences support
Now that I can test Windows binaries again, the bugs were rather easy to
spot. Because of the different flow of the opening, writing and closing of
the registry key my first attempt got things wrong - we simply always
create the key with all access rights; if it exists Windows will just open
it for us. The second bug was a cut'n'paste error.
Dirk Hohndel [Thu, 24 Nov 2011 06:56:57 +0000 (22:56 -0800)]
Split reading/writing preferences into OS specific files
This adds tested code for Linux and Mac OS, implementing the api that
Linus suggested.
The Windows code was moved into its own file, but hasn't even been compile
tested, yet.
In order to have just one interface to set or get a preference value we
encode TRUE as (void *) 1 and FALSE as NULL. This works consistently on
all platforms and regardless of whether we have 32 or 64 bit.
Dirk Hohndel [Mon, 21 Nov 2011 21:23:13 +0000 (13:23 -0800)]
Exclude surface intervals from sac rate calculation
We assume every sample with a depth of less than 10cm to be on the
surface.
This does not impact our interpolated pressures (one could assume that the
diver is not breathing from the regulator when on the surface - but
without air integration that's just an assumption).
It also doesn't change our tank pressure coloring by sac rate as that
always uses the momentary sac rate. Technically speaking this might impact
the actual colors printed (as those are relative to the total sac on the
dive which may go up due to this change).
Miika Turkia [Wed, 16 Nov 2011 05:12:44 +0000 (07:12 +0200)]
XSLT to import SDM dive log
This is tested with Linus' sample data, all basic functionality seems to
be working properly. Gas changes are implemented but not tested as there
was no samples of those. Multiple cylinders are missing because there
was no samples available.
Miika Turkia [Wed, 16 Nov 2011 05:12:43 +0000 (07:12 +0200)]
Support for importing multiple XSLT formats
Have information of multiple XSLT files on an array for importing
"alien" formatted XML dive log files. Adding support for new XSLT
requires updating the array and adding the XSLT file (provided the
format can be identified by root element of the XML).
Ok, so it's not perfect, but I've been using a version of this for the
last week or so by now, and every time I go back to the old layout I
just cringe.
So the three-pane window approach requires much more display area, and
probably wouldn't work wonderfully on low-resolution devices (ie 720x480
or even 1024x600). So for anybody doing a cellphone port, you may need
to play around with the interface. But this should be usable even on a
netbook, although not as good as on a device with more pixels.
Linus Torvalds [Sun, 20 Nov 2011 18:27:33 +0000 (10:27 -0800)]
Do proper rounding in interpolated pressure calculations
We do all the pressures in mbar, which has plenty of precision for
interpolated pressures - even when we then do our discrete integration
over many samples.
However, when we calculate those interpolated pressure points, we should
make sure that we round the result correctly, otherwise the consistent
rounding errors (from truncating the FP value into our integer mbar
values) will result in a final pressure that is noticeably off in ugly
ways (ie "end pressure set by hand to 750 mbar, but shown as 748").
There's no point in doing random hacks. Instead, do the intermediate
pressure calculations with proper rounding instead of always truncating
to mbar. With the math done correctly we have enough precision that the
end result of the pressure interpolation doesn't have the kind of errors
that caused Dirk to try to fix things up later.
Linus Torvalds [Sat, 19 Nov 2011 20:54:58 +0000 (12:54 -0800)]
Experimental hard-coded three-pane layout
I'm not happy with it, but it looks good and works better than the
alternatives I've looked at so far.
So why not happy? It's not configurable, and gtk really doesn't do a
great job with the case of notebook widgets that are shrunk to be
smaller than the contents (the cut-off gets ugly, and is outside the
notebook page!)
But committing as a way to keep track of this, and let Dirk use it.
Dirk Hohndel [Sat, 19 Nov 2011 20:47:07 +0000 (12:47 -0800)]
Correctly plot the tank end pressure if it was set manually
While printing the last pressure in the calculated sequence may seem more
logical, given that the discrete series will create some amount of error
this simply looks wrong. Instead we pick the end pressure that was
manually set.
Linus Torvalds [Sat, 19 Nov 2011 20:25:35 +0000 (12:25 -0800)]
Merge branch 'sacplot' of git://git.hohndel.org/subsurface
* 'sacplot' of git://git.hohndel.org/subsurface:
Make pressure plot shading by sac rate consistent
Improve tank pressure sac coloring
Be more consistent in our handling of rgb value tables
Remove redundant linear sample tank pressure data
Dirk Hohndel [Sat, 19 Nov 2011 19:43:37 +0000 (14:43 -0500)]
Make pressure plot shading by sac rate consistent
Some parts of the existing code used the depth at the time of the sample
to calculate the sac rate - it makes much more sense to use the average
depth. But that requires us to loop over the entries and average the
individual sac rates per segment instead of just using the beginning and
end depth of the multi-segment interval we use for smoothing purposes.
This may seem like a subtle detail, but it does in fact matter when we
plot the synthetic tank pressure values that we create when we have no
tank pressure data in the samples.
Another detail we change here is to not artificially start with a forward
looking segment of the full SAC_WINDOW but instead just start with the
first two data points and then simply let the time window grow until it
hits SAC_WINDOW - at which point it becomes a sliding window.
Dirk Hohndel [Sat, 19 Nov 2011 19:39:35 +0000 (14:39 -0500)]
Improve tank pressure sac coloring
This changes the algorithm that picks the sac color to consider
+/- 1 l/min to be the same color (before the color changed every
time you crossed above or below the average which looked silly with
our synthetic "constant sac" values as those are discrete and oscilate
around the average.
This also changes the order in which things are drawn so so that the
pressure plot goes over the depth profile plot (so the red shading of the
dive no longer changes the color of the tank pressure plot).
Dirk Hohndel [Sat, 19 Nov 2011 12:09:14 +0000 (07:09 -0500)]
Remove redundant linear sample tank pressure data
I've seen at least DivingLog do this. If you manually enter beginning and
end pressure for a tank it will either linearize the samples in between or
offer to simulate a dive (with constant SAC rate). At least the first case
is reasonably easy to detect. We throw out those samples and ensure that
we still have valid beginning and end pressure for that dive.
Linus Torvalds [Sat, 19 Nov 2011 19:47:04 +0000 (11:47 -0800)]
Add the cylinder list to the dive info edit dialog
This way, when you have a new dive that you just imported from your dive
computer, you can just double-click on the dive and fill out all the
relevant information: location, notes, buddies and cylinder info.
Linus Torvalds [Sat, 19 Nov 2011 17:06:20 +0000 (12:06 -0500)]
Add an 'edit' menu item to the dive info text fields
It just pops up the dive info edit box. This way you can be in the dive
info tab, and not have to go to the dive list just to double-click on
the dive.
This thing still needs some polish, but it's now usable.
Linus Torvalds [Sat, 19 Nov 2011 15:11:56 +0000 (10:11 -0500)]
Make double-clicking on the dive list bring up the dive editor
Now that the dive info window is read-only, we need to edit the dives
some other way. We bring up a dive info edit dialog when you
double-click on the dive list entry for that dive.
I do want to have an "edit" button or keyboard shortcut or something
too, though.
Linus Torvalds [Fri, 18 Nov 2011 13:13:02 +0000 (11:13 -0200)]
Make all the normal widgets uneditable and non-focusing
We always keep the focus on the dive list, so that the random gtk focus
handling doesn't suddenly randomly make us edit the combo boxes when the
cursor up/down keys start changing them instead of the dive list.
This means that dive location, notes and buddy/divemaster aren't
editable at all any more, but I'll fix that by making a separate dive
edit popup window.
Dirk Hohndel [Fri, 18 Nov 2011 11:57:49 +0000 (09:57 -0200)]
Color tank pressure plot based on relative sac
Linus suggested that instead of using absolute SAC values to base the
color on (which forced us to pre-define which SAC rates are green and
which are red) we should color the tank pressure plot relative to the avg
SAC rate of that dive - which I think makes the coloring much more useful
to spot when on your dive you were doing well and when you were not.
Linus Torvalds [Thu, 17 Nov 2011 20:38:46 +0000 (18:38 -0200)]
Merge branch 'sacplot' of git://github.com/dirkhh/subsurface
* 'sacplot' of git://github.com/dirkhh/subsurface:
Color pressure plot according to current SAC rate
Fix minor coding standard issues introduced by my last commit
Dirk Hohndel [Thu, 17 Nov 2011 02:34:50 +0000 (00:34 -0200)]
Color pressure plot according to current SAC rate
Similar to color indicating vertical speed in the profile plot we now use
color in the tank pressure plot to indicate current SAC rate.
We use a 45 sec sliding window to make sure we cover at least two breaths
for each current SAC sample to avoid artificial oscillation based on
breathing rhythm for corputers with high sample resolution.
Not sure about the color coding that I'm using right now - it's green-ish
for SAC rates under 15l/min ~= .55cuft/min and turns yellow and red as you
go higher. That seems to work well for me, but for other divers this may
be way off (or at least not as useful). Maybe this should be configurable?
This is a lot more diver specific than the vertical velocity where there
are clear recommendations based on safety considerations on what is good
and bad.
As a side effect, this removes the color coding that showed you whether
you were looking at pressure data from samples (green) vs. interpolated
pressure data (yellow). Not sure if people really want to see that. We
might be able to indicate this differently (I am thinking different line
width or transparency or something along those line)
Linus Torvalds [Thu, 17 Nov 2011 14:03:11 +0000 (12:03 -0200)]
Remove redundant duplicate pressure samples
At least the Suunto pressure transmitter seems to be pretty
"quantisized", and it will send identical samples for a while until the
pressure changes enough. Then subsurface gives this silly flat line
with a sudden jump downwards, which *could* be you suddenly taking a
deep breath after holding it for a while, but almost certainly it's a
sensor issue.
So just remove successive identical pressure readings. They aren't
interesting, and subsurface will actually do a good job of interpolating
it according to SAC rate instead. And they just make the XML look
worse.
Linus Torvalds [Wed, 16 Nov 2011 18:30:34 +0000 (16:30 -0200)]
Show dives "latest-first" by default
You can still order them by date by just setting the sort order on the
date column, but normally you'd be more interested in the most recent
dives.
I tried to just scroll down to the last ones automatically instead, but
gtk makes that *really* hard to do. If you do it in the natural place
for it, the scroll bar wll show up later and then cover up the last
entry anyway. So you'd have to do some crazy expose event thing or
something. Which may be the right thing to do eventually anyway, but
not worth the pain right now.
Linus Torvalds [Sun, 13 Nov 2011 17:17:38 +0000 (15:17 -0200)]
Fix the stupid gtk combo box text reset issue for real
Lubomir's solution to fill them with a newline doesn't work. Well, it
may work on some versions of gtk, but on mine it just results in an ugly
box for the control character '000a' that tries to show the newline.
So this is a third approach: if we reset the text to empty, first set it
to space (to clear it), and then set it to empty. That seems to work on
at least one version of gtk, and doesn't have the problem with the space
*remaining* when you cut-and-paste something into the combo box.
Let's see if it breaks anything else, but at worst it should be no worse
than the old "set it to space" approach - iow the combo box might
remember the space, but at least not some random data from the previous
dive that it happened to show.
Passing -1 to gtk_combo_box_set_active, seems not to work as the gtk
documentation explains; there might be a bug in the library or some
special case that is not explained.
could be related to:
http://mail.gnome.org/archives/gtk-devel-list/2004-March/msg00170.html
passing \n seems to "trick" the cell renderer to clear the entry
completely. This is a temporary solution.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 10 Nov 2011 23:42:37 +0000 (21:42 -0200)]
Save cylinder O2/He content after the cylinder type description
This changes the save format xml to be a bit more readable: instead of
putting the gasmix first, put the cylinder type (size, workpressure and
description) first, then gasmix, then pressure details.
It makes no difference for machine parsing, but I think it's a lot more
logical for humans that actually look at the xml file. And we really do
want to make the xml file readable by humans.
Linus Torvalds [Thu, 10 Nov 2011 23:33:38 +0000 (21:33 -0200)]
Make the sample-vs-cylinder pressure check more liberal
This makes it consider them to be identical if they are within half a
bar of each other. If you edit the pressures by hand and set them to
the same bar pressure as the samples, they may not be identical to the
last milli-bar, but clearly the manually entered cylinder pressure isn't
significantly different from the sample data, so consider it redundant.
We do want manual overrides of cylinder pressures to take precedence
over sample data (as Dirk so eloquently puts it, some dive computers
really don't have very reliable sample data), but at the same time the
sample data is the one we are expecting to be fairly accurate. The
starting and ending pressure overrides are for when there is no sample
data, or when the sample data is totally wrong for some reason.
Linus Torvalds [Thu, 10 Nov 2011 00:37:18 +0000 (19:37 -0500)]
Remove unused 'minpressure/endpressure' fields from plot info
.. and fix the maxpressure to actually look at *all* the cylinders, so
that if you don't have sample data, but rely onmanually set cylinder
pressures, it now really is the max of all the cylinders.
Dirk Hohndel [Thu, 10 Nov 2011 00:15:28 +0000 (19:15 -0500)]
Fix breakage caused by Linus' changes to tank pressure handling
We no longer look at the start and end pressure for a tank, if the tank
has valid pressure data in its samples (which makes sense). Sadly that
breaks the current pressure interpolation code. With this patch most of
those problems should be fixed.
Dirk Hohndel [Wed, 9 Nov 2011 21:01:11 +0000 (13:01 -0800)]
Improve temperature text plotting in profile display
- make the text a lighter color so it stands out more
- change the heuristic when we print text to include both relative change
in temperature and time since the last text was printed
- print the first temperature we encounter
- allow an ending temperature to be printed if the last printed
temperature was before the 75% mark of the dive
Linus Torvalds [Wed, 9 Nov 2011 16:51:20 +0000 (08:51 -0800)]
Add "enable" button for manual pressure setting
This grays out the pressure settings in the cylinder editing widget if
the pressure data has been taken from the samples. You can still
manually override the data, but you now need to enable that manual
override explicitly.
This makes the semantics of editing start/end pressures of dives with
pressure sample data a bit more intuitive, I think.
Linus Torvalds [Wed, 9 Nov 2011 16:37:49 +0000 (08:37 -0800)]
Keep the start/end spinbuttons as GtkWidget
For graying things out, we want a widget, not a spinbutton. Although
I'm sure we could just cast things back and forth. But let's be
consistent with what we do, and only ever cast from GtkWidget to
GtkSpinButton, and have the same logic as for the "o2" widget that also
needs to be explicitly enabled.
projects / ext / subsurface.git / log