User Manual
-Version 0.0.3
+Version 0.0.7
Autor documentation: Jacco van Koll <jko@haringstad.com>
Scope of this document is the usage of the program.
Please read the build manual for instructions how to build the
-software and (if needed) itยดs dependencies.
+software and (if needed) its dependencies.
Audience: Fun Divers, Tec Divers, Professional Divers
In this manual the Suunto Viper will be used for all examples.
+
2. Requirements
Before you are able to import information from your divecomputer into
Area with the dives (usually called dive list), which can be sorted by number, date, etc.
-4. Import new dives
+4. Import new dives from your divecomputer
Before you start fiddeling around with your divecomputer, note that
there are divecomputers that consume more power when they are in the
Now it is time to hook up your divecomputer to your Linux system:
- Connect your interface cable to your divecomputer
+ Make sure that your OS has the required drivers installed
+
+ On Linux this means you need to have the correct kernel
+ module loaded. Most distributions will do this automatically
+ for you.
+
+ On Windows, the OS should offer to download the correct
+ driver when you connect to the USB port.
+
+ On a Mac you at times have to manually hunt for the correct
+ driver. For example the correct driver for the Mares Puck
+ devices can be found as Mac_OSX_VCP_Driver.zip at
+ http://www.silabs.com/support/pages/support.aspx?ProductFamily=USB+Bridges
+
Connect your interface cable to a free USB port
+
Put your divecomputer into PC Communication mode. (For Suunto Viper, press Mode - 1 Memory - 3 TR-PC)
(You should consult the manual of your specific divecomputer for your brand and type)
+
Go in Subsurface to 'File - Import'
Within the popup, under Dive computer, choose your brand and type. Here we choose Suunto Vyper.
- Change the devicename under which your interface is connected. Default is /dev/ttyUSB0
+ Change the devicename under which your interface is connected.
+ On Linux, default is /dev/ttyUSB0
+ On Windows, default is COM3
+ On Mac, default is ... specific to the dive computer
+
Click the 'OK' button.
Now watch how your data is retrieved from your divecomputer!
Now your dive information for this dive is complete. You can now press
ok in the Dive Info screen and view the results.
+
8. Adding equipment info
In Area with the 3 tabs there is the tab Equipment. With this tab, you
Just like you added your Cylinder information in 7. Edit equipment info, you add your cylinder
information for the second Cylinder. Fill in all the information about this Cylinder and press OK.
+
9. View info & Stats
After adding all the information, you can use the tab Info &
Min SAC: Lowest of Surface Air Consumption of all your dives
Avg SAC: Average Surface Air Consuption of all your dives, calculated
+
10. Setting up preferences
Subsurface has the ability to modify the preferences you want. By
one not enabled.
Clicking OK on the dialog stores these settings.
+
+
+11. How to find the Device Name
+
+When you connect your divecomputer by using an USB connector, most of the
+time, the default of '/dev/ttyUSB0' should work. But if you have other
+Serial to USB devices, this can be different because '/dev/ttyUSB0' is
+already in use.
+
+One of the ways to find out what your dive name is:
+
+ Disconnect your usb cable of your dive computer
+ Open a terminal
+ Type the command: 'dmesg' and press enter
+ Plug in your usb cable of your divecomputer
+ Type the command: 'dmesg' and press enter
+
+Within your terminal you should see a message similair to this one:
+
+ usb 2-1.1: new full speed USB device number 14 using ehci_hcd
+ usbcore: registered new interface driver usbserial
+ USB Serial support registered for generic
+ usbcore: registered new interface driver usbserial_generic
+ usbserial: USB Serial Driver core
+ USB Serial support registered for FTDI USB Serial Device
+ ftdi_sio 2-1.1:1.0: FTDI USB Serial Device converter detected
+ usb 2-1.1: Detected FT232BM
+ usb 2-1.1: Number of endpoints 2
+ usb 2-1.1: Endpoint 1 MaxPacketSize 64
+ usb 2-1.1: Endpoint 2 MaxPacketSize 64
+ usb 2-1.1: Setting MaxPacketSize 64
+ usb 2-1.1: FTDI USB Serial Device converter now attached to ttyUSB3
+ usbcore: registered new interface driver ftdi_sio
+ ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
+
+You see that in the third line from the bottom, the usb adapter is
+detected and is connected to 'ttyUSB3'. Now you use this information in
+the import settings as '/dev/ttyUSB3'. Your divecomputer interface is
+connected and you should be able to import your dives.
+
+
+12. Importing dives from JDivelog
+
+Maybe you have been using JDivelog and you have a lot of dives logged in
+this program. You don't have to type all information by hand into
+Subsurface, because you can import your divelogs from JDivelog.
+
+JDivelog stores its information into files with the extention of .jlb.
+These .jlb contain all the information that has been stored, except your
+images in xml format.
+
+By using the menu 'File - Import' you get the popup, like described in
+chapter 4, Importing new dives. Within this popup there is the option
+to import existing files which are already on your computer. To import
+your JDivelog file(s) do the following:
+
+ Open 'File - Import' on the menu
+ Use the file locator under XML file name
+ Browse your directories to the location where your *.jlb file is
+ Select your existing *.jlb file and click 'open'
+ Click the OK button in the popup
+
+After a few moments, you see your existing logs in Subsurface. Now you can
+edit your dives like explained in chapter 6.
+
+Information that is imported from JDivelog into the location field:
+
+ Extended dive location information
+
+Information that is merged into the location or notes field:
+
+ Used amount of weight
+ Used type of suit
+ Used type of gloves
+ Type of dive
+ Dive activity
+
+Alternatively, you can start subsurface with the --import comand line
+which will have the same effect:
+
+ subsurface MyDives.xml --import JDivelogDives.jlb
+
+will open your divelog (assuming that's called MyDives.xml) and then
+import the dives from JdivelogDives.jlb. You can now save the combined
+divelog back as MyDives.xml.
+
+Subsurface will similarly import xml exports from DivingLog as well as
+Suunto DiveManager.
+
+When importing dives subsurface tries to detect multiple records for
+the same dive and merges the information as best as it can. So as long
+as there are no time zone issues (or other reasons that would cause the
+beginning time of the dives to be substantially different) subsurface
+will not create duplicate entries.
+
+
+13. Importing dives from Suunto Divemanager 3.*
+
+Before you can start importing dives from Suunto Divemanager, you first
+have to export the dives you want to import. Subsurface does not import
+directly from the Suunto Divemanager log files. The following procedures
+unpacking instructions for Linux and Windows.
+
+13.1 Export from Suunto Divemanager:
+
+ Start Suunto Divemanager and login with the name containing the logs
+ Do not start the import wizard to import dives from your computer.
+ In the navigation tree on the left side of the program-window, select your dives.
+ Within the list of dives, select the dives you would like to import later:
+ To select certain dives: hold ctrl and point & click the dive
+ To select all dives: Select the first dive, hold down shift and select the last dive
+ With the dives marked, use the program menu 'File - Export'
+ The export popup will show
+ Within this popup, there is one field called Export Path.
+ Click the button browse next to the field Export Path
+ A file-manager like window pops up
+ Navigate to the directory where you want to store the Divelog.SDE file
+ Optional change the name of the file you want to save
+ Click 'Save'
+ You are back in the Export popup. Press the button 'Export'
+ Your dives are now exported to the file Divelogs.SDE.
+
+13.2 Unpacking the Divelogs.SDE on Windows
+
+Renaming your file to a .zip:
+
+ Use the filemanager (explorer) and navigate to your Divelogs.SDE file
+ Right click on the Divelogs.SDE file and choose 'Rename'
+ Change the name into Divelogs.SDE.zip
+ Press enter when done. A warning popup shows:
+ The file could be unusable when changing the extension. Are you sure:
+ Press OK.
+ Your filemanager will show now the filename Divelogs.SDE.zip
+
+When you double click your Divelogs.SDE.zip file, your preferred archiving
+tool will start and show you the list of xml files that are in the zip
+archive. Select all the xml files and extract them to a place where you
+can find them later in the process.
+
+13.3 Unpacking the Divelogs.SDE on Linux
+
+The assumption is that you have exported your Divelogs.SDE on a Windows
+system. You have to transfer the file to a location where you can read it
+from within your Linux environment. You can use file-tranfer, shared
+storage or an USB storage device to do this.
+The example uses an USB storage:
+
+ Insert your USB storage into your Windows computer
+ Use the filemanager (explorer) to navigate to the location where your Divelogs.SDE file is located
+ Copy the file to your USB storage:
+ Select the file by 1 click
+ Press Ctrl+c
+ Navigate to your USB Storage
+ Press Ctrl+v
+ Disconnect your USB storage by right clicking your USB storage in the explorer and choose Eject
+ Insert your USB storage into your Linux computer
+ Use your favourite filemanager to navigate to your USB storage
+ Copy the file to /tmp by:
+ Right click on the file
+ select copy
+ navigate to /tmp
+ press Ctrl+v or use the menu 'Edit - Paste'
+ The file is now transfered to /tmp
+
+Now the file is in /tmp, we can extract the xml files from it. You can do
+this by hand, or use the example script in Appendix B.
+
+To extract the xml files, we need to open a terminal and use the following
+commands:
+
+ cd /tmp
+ mkdir suunto
+ cd suunto
+ unzip ../Divelogs.SDE
+
+Your divelogs have now been extracted from the Divelogs.SDE file and you
+can import them with the command:
+
+ subsurface *.xml
+
+And with the menu 'File - Save' you can save your dives into the
+Subsurface format.
+
+
+14. The menu and sub-menus
+
+Within Subsurface, there are several menu and sub-menu options. All of
+those will be described here with their function.
+
+14.1 The file menu
+
+The file menu is used for the following menu options:
+
+ Open: Open your saved Subsurface xml file(s)
+ Save: Save your current divelogs or changes you made to your divelogs
+ Print: Print your current divelog profiles and information about the dive
+ Import: Import your dives from your divecomputer, JDivelogs or Suunto Divemanager
+ Preferences: Set your preferences as described in chapter 10
+ Quit: Quit the program
+
+14.2 The Log menu
+
+Within the Log menu, there are only 2 sub-items:
+
+ Renumber: This option provides you with a popup. Within this
+ popup you can choose what the first number of your dives should be
+ for this set of dives.
+ View: This is a submenu containing:
+ List: Show only the list of dives you have made
+ Profile: Show only the dive profile of the selected dive
+ Info: Show only the 3 tab information screen
+ Three: Show the 'default' 3 screen setup
+
+14.3 The Filter menu
+
+This menu gives you the choice to enable or disable Events for the
+selected divelog(s). At this time, you can enable or disable ascent.
+When you enable ascent for your dives, within the dive profile, a yellow
+marker with exclamation sign (!) will show on the points where you have
+ascented.
+
+14.4 The Help menu
+
+The Help menu shows only the About, which contains the version and author
+information and License button.
+
+
+Appendix A
+
+The use of libdivecomputer provides the support for divecomputers. Within
+the list of computers in the 'File - import' menu, you will see a listing
+of divecomputers. This list is covering a compatible set. Please check
+your users manual to check if your computer will be supported.
+
+ Supported divecomputers:
+
+ Atomics:
+ Cobalt
+ Cressi:
+ Edi
+ Mares:
+ Icon HD
+ Nemo
+ Puck
+ Air
+ Oceanic:
+ Veo250
+ VT Pro
+ OSTC: *
+ DR5
+ 2N
+ Reefnet:
+ Sensus
+ Sensus Pro
+ Sensus Ultra
+ Suunto:
+ Cobra
+ 2
+ 3
+ D3
+ D9
+ D4
+ D4i
+ D6
+ D6i
+ D9tx
+ Eon
+ Gekko
+ HelO2
+ Mosquito
+ Solution
+ Alpha
+ Nitrox/Vario
+ Stinger
+ Vyper
+ 2
+ Air
+ Vytec
+ DS
+ Zoop
+ Uwatec:
+ Aladin
+ Memo Mouse
+ Smart
+ Zeagle:
+ N2iTiON 3
+
+* OSTC computers are listed in the pull-down menu as OSTC. All 3 types are supported.
+
+
+Appendix B
+
+#!/bin/bash
+#
+# Small basic example script to unpack Suunto Export files
+# for the use with Subsurface
+#
+
+echo -n "Enter the directory where you stored your Suunto Divemanager export file: "
+read SuuntoExportDir
+
+echo -n "Enter the name of your Suunto Divemanager export file: "
+read SuuntoExportFile
+
+echo "You have entered: $SuuntoExportDir/$SuuntoExportFile"
+
+cd $SuuntoExportDir
+
+ if [ -e ./$SuuntoExportFile ]; then
+ mkdir SuuntoXML
+ cd SuuntoXML
+ unzip ../$SuuntoExportFile
+ subsurface *.xml
+ else
+ echo "Nothing found! Try again!"
+ fi
projects / ext / subsurface.git / blobdiff