+
+
+11. How to find the Device Name
+
+When you connect your divecomputer by using an USB connector, most of the
+time, the default of ยด/dev/ttyUSB0' should work. But if you have other
+Serial to USB devices, this can be different because '/dev/ttyUSB0' is
+already in use.
+
+One of the ways to find out what your dive name is:
+
+ Disconnect your usb cable of your dive computer
+ Open a terminal
+ Type the command: 'dmesg' and press enter
+ Plug in your usb cable of your divecomputer
+ Type the command: 'dmesg' and press enter
+
+Within your terminal you should see a message similair to this one:
+
+ usb 2-1.1: new full speed USB device number 14 using ehci_hcd
+ usbcore: registered new interface driver usbserial
+ USB Serial support registered for generic
+ usbcore: registered new interface driver usbserial_generic
+ usbserial: USB Serial Driver core
+ USB Serial support registered for FTDI USB Serial Device
+ ftdi_sio 2-1.1:1.0: FTDI USB Serial Device converter detected
+ usb 2-1.1: Detected FT232BM
+ usb 2-1.1: Number of endpoints 2
+ usb 2-1.1: Endpoint 1 MaxPacketSize 64
+ usb 2-1.1: Endpoint 2 MaxPacketSize 64
+ usb 2-1.1: Setting MaxPacketSize 64
+ usb 2-1.1: FTDI USB Serial Device converter now attached to ttyUSB3
+ usbcore: registered new interface driver ftdi_sio
+ ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
+
+You see that in the third line from the bottom, the usb adapter is
+detected and is connected to 'ttyUSB3'. Now you use this information in
+the import settings as '/dev/ttyUSB3'. Your divecomputer interface is
+connected and you should be able to import your dives.
+
+
+12. Importing dives from JDivelog or other dive log programs
+
+Maybe you have been using JDivelog and you have a lot of dives logged in
+this program. You don't have to type all information by hand into
+Subsurface, because you can import your divelogs from JDivelog.
+
+JDivelog stores it's information into files with the extention of .jlb.
+These .jlb contain all the information that has been stored, except your
+images in xml format.
+
+By using the menu 'File - Import' you get the popup, like described in
+chapter 4, Importing new dives. Within this popup there is the option
+to import existing files which are already on your computer. To import
+your JDivelog file(s) do the following:
+
+ Open 'File - Import' on the menu
+ Use the file locator under XML file name
+ Browse your directories to the location where your *.jlb file is
+ Select your existing *.jlb file and click 'open'
+ Click the OK button in the popup
+
+After a few moments, you see your existing logs in Subsurface. Now you can
+edit your dives like explained in chapter 6.
+
+Information that is not (yet) imported from JDivelog:
+
+ Used amount of weight
+ Used type of suit
+ Used type of gloves
+ Extended dive location information
+ Type of dive
+ Dive activity
+
+Alternatively, you can start sunsurface with the --import comand line
+which will have the same effect:
+
+ subsurface MyDives.xml --import JDivelogDives.jlb
+
+will open your divelog (assuming that's called MyDives.xml) and then
+import the dives from JdivelogDives.jlb. You can now save the combined
+divelog back as MyDives.xml.
+
+Subsurface will similarly import xml exports from DivingLog as well as
+Suunto DiveManager.
+
+When importing dives subsurface tries to detect multiple records for
+the same dive and merges the information as best as it can. So as long
+as there are no time zone issues (or other reasons that would cause the
+beginning time of the dives to be substantially different) subsurface
+will not create duplicate entries.
+
+
+Appendix A
+
+The use of libdivecomputer provides the support for divecomputers. Within
+the list of computers in the 'File - import' menu, you will see a listing
+of divecomputers. This list is covering a compatible set. Please check
+your users manual to check if your computer will be supported.
+
+ Supported divecomputers:
+
+ Atomics:
+ Cobalt
+ Cressi:
+ Edi
+ Mares:
+ Icon HD
+ Nemo
+ Puck
+ Air
+ Oceanic:
+ Veo250
+ VT Pro
+ OSTC: *
+ DR5
+ 2N
+ Reefnet:
+ Sensus
+ Sensus Pro
+ Sensus Ultra
+ Suunto:
+ Cobra
+ 2
+ 3
+ D3
+ D9
+ D4
+ D4i
+ D6
+ D6i
+ D9tx
+ Eon
+ Gekko
+ HelO2
+ Mosquito
+ Solution
+ Alpha
+ Nitrox/Vario
+ Stinger
+ Vyper
+ 2
+ Air
+ Vytec
+ DS
+ Zoop
+ Uwatec:
+ Aladin
+ Memo Mouse
+ Smart
+ Zeagle:
+ N2iTiON 3
+
+* OSTC computers are listed in the pull-down menu as OSTC. All 3 types are supported.