+You also want to edit your Cylinder information. And in the previous chapter, this was not edited. There is
+still another item to edit in the Dive Info screen:
+
+ Cylinder: A double-click fieldset. Here you can edit your Cylinder information
+
+So, when you double click on the cylinder info, you get another popup. This popup gives you the following:
+
+ Cylinder: Pull-down where you can choose your Cylinder, or add your own
+ Size: The volume if not 'filled'
+ Pressure: The maximum pressure of this Cylinder
+ Optional:
+ Start Pressure: What was the pressure starting the dive
+ End Pressure: What was the pressure ending the dive
+ Nitrox: What was the percentage of blend
+
+Now we are going to enter the data:
+
+ Cylinder: 15.0 l
+ Size: 15.0
+ Pressure: 220
+
+ Now tick the option for Start & End pressure
+
+ Start Pressure: 180
+ End Pressure: 60
+ Press Ok
+
+Now your dive information for this dive is complete. You can now press ok in the Dive Info screen and view the results.
+
+8. Adding equipment info
+
+In Area with the 3 tabs there is the tab Equipment. With this tab, you can add Cylinders.
+We are going to add an additional Cylinder:
+
+ In the main screen, click on the Equipment tab. This shows your Cylinder you added in 7.
+ Now press the Add button and the Cylinder popup comes back.
+ Just like you added your Cylinder information in 7. Edit equipment info, you add your cylinder
+ information for the second Cylinder. Fill in all the information about this Cylinder and press OK.
+
+9. View info & Stats
+
+After adding all the information, you can use the tab Info & Stats. This tab will provide
+you with all the (statistical and calculated) information regarding your dive.
+
+The information contains:
+
+ Dive Info:
+
+ Date: Date and time of your dive
+ Dive Time: Duration of your dive
+ Surf Intv: Interval between previous dive and this dive
+ Max Depth: Maximum depth of this dive
+ Avg Depth: The average depth of this dive
+ Water Temp: Lowest temperature of the water
+ SAC: The amount of Surface Air Consumption liters per minute
+ OTU: The Oxygen Toxicity Units of this dive
+ O2/He: Amount of Oxygen/Helium
+ Gas Used: The total volume of gas used during this dive
+
+ Statistics:
+
+ Total time: Total time of all your dives together, calculated
+ Avg Time: The average divetime of your dives, calculated
+ Max Depth: The maximum depth of all your dives
+ Avg Depth: The average depth of all your dives, calculated
+ Max SAC: Highest of Surface Air Consumption of all your dives
+ Min SAC: Lowest of Surface Air Consumption of all your dives
+ Avg SAC: Average Surface Air Consuption of all your dives, calculated
+
+10. Setting up preferences