User Manual
-Version 0.0.2
-
-Autor documentation: Jacco van Koll
+Version 0.0.4
+Autor documentation: Jacco van Koll <jko@haringstad.com>
Scope of this document is the usage of the program.
Please read the build manual for instructions how to build the
software and (if needed) it´s dependencies.
-
Audience: Fun Divers, Tec Divers, Professional Divers
In this manual the Suunto Viper will be used for all examples.
+
2. Requirements
Before you are able to import information from your divecomputer into
Now it is time to hook up your divecomputer to your Linux system:
- Connect your interface cable to your divecomputer
+ Make sure that your OS has the required drivers installed
+
+ On Linux this means you need to have the correct kernel
+ module loaded. Most distributions will do this automatically
+ for you.
+
+ On Windows, the OS should offer to download the correct
+ driver when you connect to the USB port.
+
+ On a Mac you at times have to manually hunt for the correct
+ driver. For example the correct driver for the Mares Puck
+ devices can be found as Mac_OSX_VCP_Driver.zip at
+ http://www.silabs.com/support/pages/support.aspx?ProductFamily=USB+Bridges
+
Connect your interface cable to a free USB port
+
Put your divecomputer into PC Communication mode. (For Suunto Viper, press Mode - 1 Memory - 3 TR-PC)
(You should consult the manual of your specific divecomputer for your brand and type)
+
Go in Subsurface to 'File - Import'
Within the popup, under Dive computer, choose your brand and type. Here we choose Suunto Vyper.
- Change the devicename under which your interface is connected. Default is /dev/ttyUSB0
+ Change the devicename under which your interface is connected.
+ On Linux, default is /dev/ttyUSB0
+ On Windows, default is COM3
+ On Mac, default is ... specific to the dive computer
+
Click the 'OK' button.
Now watch how your data is retrieved from your divecomputer!
An example:
-On Sunday Oct 23, 2011 you made a dive. In the log line of this dive, you see the following information:
+On Sunday Oct 23, 2011 you made a dive.
+In the log line of this dive, you see the following information:
#: 12 Dive number
Date: Sun, Oct 23, 2011 10:50 Date and time of your dive
6. Edit the dive info
+When you double click on the dive log line, the editor window
+opens. Now you can add information that is missing. Let start with
+completing the example:
+
+You double clicked on dive #12, as described in 5. Viewing and
+completing your logs. The Dive Info window pops up and you will see
+the following:
+
+ Location: An input where you can enter your new location, or you can choose with the pull-down previous locations
+ Dive Master: An input where you can enter the name of your Dive Master, or you can choose with the pull-down a previous name
+ Buddy: An input where you can enter het name of you Buddy, or you can choose with the pull-down a previous name
+ Rating: A pull-down where you can rate your dive.
+ Notes: A free input where you can enter information about your dive. What you've seen, etc.
+
+In this example we use the following information:
+
+ Location: Oostvoornse Meer
+ Dive Master: S. de Vries
+ Buddy: S. de Vries
+ Rating: 3 stars
+ Notes: First dive here. Good visibility. Did see the concrete poles, some crab and fish. Very nice and easy dive.
+ Made movie with 'headcam'.
+
+Now don't press ok yet!
7. Edit equipment info
+You also want to edit your Cylinder information. And in the previous
+chapter, this was not edited. There is still another item to edit in
+the Dive Info screen:
+
+ Cylinder: A double-click fieldset. Here you can edit your Cylinder information
+
+So, when you double click on the cylinder info, you get another
+popup. This popup gives you the following:
+
+ Cylinder: Pull-down where you can choose your Cylinder, or add your own
+ Size: The volume if not 'filled'
+ Pressure: The maximum pressure of this Cylinder
+ Optional:
+ Start Pressure: What was the pressure starting the dive
+ End Pressure: What was the pressure ending the dive
+ Nitrox: What was the percentage of blend
+
+Now we are going to enter the data:
-8. Setting up preferences
+ Cylinder: 15.0 l
+ Size: 15.0
+ Pressure: 220
+
+ Now tick the option for Start & End pressure
+
+ Start Pressure: 180
+ End Pressure: 60
+ Press Ok
+
+Now your dive information for this dive is complete. You can now press
+ok in the Dive Info screen and view the results.
+
+
+8. Adding equipment info
+
+In Area with the 3 tabs there is the tab Equipment. With this tab, you
+can add Cylinders. We are going to add an additional Cylinder:
+
+ In the main screen, click on the Equipment tab. This shows your Cylinder you added in 7.
+ Now press the Add button and the Cylinder popup comes back.
+ Just like you added your Cylinder information in 7. Edit equipment info, you add your cylinder
+ information for the second Cylinder. Fill in all the information about this Cylinder and press OK.
+
+
+9. View info & Stats
+
+After adding all the information, you can use the tab Info &
+Stats. This tab will provide you with all the (statistical and
+calculated) information regarding your dive.
+
+The information contains:
+
+ Dive Info:
+
+ Date: Date and time of your dive
+ Dive Time: Duration of your dive
+ Surf Intv: Interval between previous dive and this dive
+ Max Depth: Maximum depth of this dive
+ Avg Depth: The average depth of this dive
+ Water Temp: Lowest temperature of the water
+ SAC: The amount of Surface Air Consumption liters per minute
+ OTU: The Oxygen Toxicity Units of this dive
+ O2/He: Amount of Oxygen/Helium
+ Gas Used: The total volume of gas used during this dive
+
+ Statistics:
+
+ Total time: Total time of all your dives together, calculated
+ Avg Time: The average divetime of your dives, calculated
+ Max Depth: The maximum depth of all your dives
+ Avg Depth: The average depth of all your dives, calculated
+ Max SAC: Highest of Surface Air Consumption of all your dives
+ Min SAC: Lowest of Surface Air Consumption of all your dives
+ Avg SAC: Average Surface Air Consuption of all your dives, calculated
+
+
+10. Setting up preferences
Subsurface has the ability to modify the preferences you want. By
using menu 'File - Preferences' you will be presented a popup with the
Volume: The volume of your tank(s) in Liter or CuFt (Cubic Feet) (At sea-level pressure)
Temperature: The temperature of the water in Celcius or Fahrenheit
-In the main screen, you did see in Area 3, some information. In the Columns options, you can enable/disable options you would like to show there:
+In the main screen, you did see in Area 3, some information. In the
+Columns options, you can enable/disable options you would like to show
+there:
Show Temp: Shows the temperature of your dive
Show Cyl: Shows the cylinder(s) of your dive
- Show O2%: Shows the 02% of your dive
+ Show O2%: Shows the O2% of your dive
Show SAC: Shows the SAC of your dive (Surface Air Consumption)
Show OTU: Shows the OTU of your dive (Oxygen Toxicity Units)
one not enabled.
Clicking OK on the dialog stores these settings.
+
+
+11. How to find the Device Name
+
+When you connect your divecomputer by using an USB connector, most of the
+time, the default of ´/dev/ttyUSB0' should work. But if you have other
+Serial to USB devices, this can be different because '/dev/ttyUSB0' is
+already in use.
+
+One of the ways to find out what your dive name is:
+
+ Disconnect your usb cable of your dive computer
+ Open a terminal
+ Type the command: 'dmesg' and press enter
+ Plug in your usb cable of your divecomputer
+ Type the command: 'dmesg' and press enter
+
+Within your terminal you should see a message similair to this one:
+
+ usb 2-1.1: new full speed USB device number 14 using ehci_hcd
+ usbcore: registered new interface driver usbserial
+ USB Serial support registered for generic
+ usbcore: registered new interface driver usbserial_generic
+ usbserial: USB Serial Driver core
+ USB Serial support registered for FTDI USB Serial Device
+ ftdi_sio 2-1.1:1.0: FTDI USB Serial Device converter detected
+ usb 2-1.1: Detected FT232BM
+ usb 2-1.1: Number of endpoints 2
+ usb 2-1.1: Endpoint 1 MaxPacketSize 64
+ usb 2-1.1: Endpoint 2 MaxPacketSize 64
+ usb 2-1.1: Setting MaxPacketSize 64
+ usb 2-1.1: FTDI USB Serial Device converter now attached to ttyUSB3
+ usbcore: registered new interface driver ftdi_sio
+ ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
+
+You see that in the third line from the bottom, the usb adapter is
+detected and is connected to 'ttyUSB3'. Now you use this information in
+the import settings as '/dev/ttyUSB3'. Your divecomputer interface is
+connected and you should be able to import your dives.
+
+
+Appendix A
+
+The use of libdivecomputer provides the support for divecomputers. Within
+the list of computers in the 'File - import' menu, you will see a listing
+of divecomputers. This list is covering a compatible set. Please check
+your users manual to check if your computer will be supported.
+
+ Supported divecomputers:
+
+ Atomics:
+ Cobalt
+ Cressi:
+ Edi
+ Mares:
+ Icon HD
+ Nemo
+ Puck
+ Oceanic:
+ Veo250
+ VT Pro
+ OSTC: *
+ DR5
+ 2N
+ Reefnet:
+ Sensus
+ Sensus Pro
+ Sensus Ultra
+ Suunto:
+ D9
+ Eon
+ Solution
+ Viper
+ Viper Air
+ Uwatec:
+ Aladin
+ Memo Mouse
+ Smart
+ Zeagle:
+ N2iTiON 3
+
+* OSTC computers are listed in the pull-down menu as OSTC. All 3 types are supported.