Linus Torvalds [Sat, 24 Mar 2012 04:07:53 +0000 (21:07 -0700)]
Merge branch 'weight' of git://subsurface.hohndel.org/subsurface
Pull weight management from Dirk Hohndel:
"This is the fifth or sixth version of this code, I'm begining to lose
track. I still struggle with the balance between code duplication and
unnecessary indirectness and complexity. Maybe I'm just not finding
the right level of abstraction. Maybe I'm just trying too hard.
The code here is reasonably well tested. Works for me :-)
It can import DivingLog xml files with weight systems and correctly
parses those. It obviously can read and write weight systems in its
own file format. It adds a KG/lbs unit default (and correctly stores
that).
The thing I still worry about is the code in equipment.c. You'll see
that I tried to abstract things in a way that weight systems and
cylinders share quite a bit of code - but there's more very similar
code that isn't shared as my attempts to do so turned into ugly and
hard to read code. It always felt like trying to write C++ in C..."
* 'weight' of git://subsurface.hohndel.org/subsurface:
Add weight system tracking
Fix up some trivial conflicts due to various renaming of globals and
simplification in function interfaces.
Miika Turkia [Wed, 14 Mar 2012 17:01:34 +0000 (19:01 +0200)]
Show statistics of selected dives
If at least 2 dives are selected, show statistics of these dives on
Overall Stats. Otherwise, show the statistics of all dives. Temperature
is also added to the shown statistics.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Minor change to avoid adding statistics.h (moved the global variable and
external function declaration to display-gtk.h).
Another minor change to the text displayed for the "Stats" notebook page.
Linus Torvalds [Sat, 28 Jan 2012 02:27:30 +0000 (18:27 -0800)]
Cochran: fix up dive data descrambling
This seems to do the dive data descrambling right for both files I have
access to. Except it uses a hardcoded (different) offset for the two.
I have yet to figure out how to automatically detect the offset itself
properly, so you have to compile for the right file.
I'll figure it out, but I'm committing this as a reasonable point in the
process.
Linus Torvalds [Sat, 28 Jan 2012 01:36:42 +0000 (17:36 -0800)]
Fix up Cochran dive header decoding offset
It turns out the odd "different CAN files have different header offsets"
came from the fact that the decode block was different lengths, and I
had not picked the correct place to start - and instead had found two
different places that were at different offsets due to the decode block
length differences.
This fixes that up, and it looks like the dive header is correctly
descrambled (but what the data *means* is unclear, although there is now
an ASCII date and time visible, so at least one part of it is pretty
obvious).
The actual dive data unscrambling is still different for the two
test-files I have to play with, I do not know why.
Linus Torvalds [Fri, 27 Jan 2012 23:11:34 +0000 (15:11 -0800)]
cochran: do a partial header de-scramble
This descrambles at least parts of the header data. Some of it has the
same pattern of data 4kB apart, it may be that there is a dive hiding in
there too (ie what I currently call a "header" may in fact be a header
_plus_ a dive).
But the 4kB thing may well be an artifact of the crazy scrambling code
itself. Who knows what kind of chunking the Cochran Analyst
"encryption" uses.
As with the dive data, there seems to be some offset differences between
different CAN files.
Linus Torvalds [Fri, 27 Jan 2012 22:10:55 +0000 (14:10 -0800)]
cochran: do the full de-scramble for one case
So this descrambles all the dives in *one* of my cochran test files. I
still don't know what the dive data *means*, but it's not a random
jumble of bytes any more: there are very clear patterns.
However, the magic offsets that work for that particular CAN file are
not generic, because they don't work for another. So there is some
magic dynamic decoding that I don't know about. There is probably more
decode information in the initial decode block, over and beyond just the
scrambling bytes.
(The scrambling array is 234 bytes starting at 0x40001, but the first
actual *dive* data starts at 0x45e03, so there's tons of unknown stuff
in the file even outside the dives themselves)
Linus Torvalds [Fri, 27 Jan 2012 22:02:50 +0000 (14:02 -0800)]
Make cochran debug output a bit easier to use directly
Just do the hex-dump in the program, and print all the results to
standard output. Avoid the need to do 'od' by hand etc to see what
happens when you play with the decoder.
Linus Torvalds [Fri, 27 Jan 2012 20:43:40 +0000 (12:43 -0800)]
Add some initial cochran CAN file parsing
It's broken, and currently only writes out a debug output file per dive.
I'm not sure I'll ever really be able to decode the mess that is the
Cochran ANalyst stuff, but I have a few test files, along with separate
depth info from a couple of the dives in question, so in case this ever
works I can at least validate it to some degree.
The file format is definitely very intentionally obscured, though.
Annoying. It's not like the Cochran software is actually all that good
(it's really quite a horribly nasty Windows-only app, I'm told).
Cochran Analyst is very much not the reason why people would buy those
computers. So Cochran making their computers harder to use with other
software is just stupid.
Linus Torvalds [Fri, 27 Jan 2012 18:56:36 +0000 (10:56 -0800)]
Import: always open and read the file before checking the filename extension
Most of the parsers will want the content in memory, so keep them
simple. The fact that the Suunto parser uses "libzip" that has to
re-open the file is annoying and causes us to re-open the file etc.
But it's the odd man out, so don't design the "open_by_filename()"
function around it. Pretty much everybody else will want to avoid
having to cook up their own IO routines.
Also, when reading the file, NUL-terminate the buffer. This allows us
to just treat text files as large strings if we want to, and doesn't
matter for binary files (we still pass in the length explicitly).
Linus Torvalds [Fri, 27 Jan 2012 16:11:24 +0000 (08:11 -0800)]
Fix typo ('suundo' instead of 'suunto')
I apparently was so congested that it affected my typing too when I
wrote that, and then copy-paste meant that the use and declaration
matched despite the misspelling.
Reported-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 27 Jan 2012 01:43:33 +0000 (17:43 -0800)]
Add "native" Suunto SDE zip file reading
You need to have libzip-devel installed, and pkg-config needs to know about it
for the build to pick up on it.
On at least Fedora, a simple "yum install libzip-devel" will make things
work, although you may need to force a rebuild of subsurface too (the
"file.o" file in particular - the Makefile doesn't track system
dependencies).
Linus Torvalds [Wed, 18 Jan 2012 04:02:33 +0000 (20:02 -0800)]
Merge branch 'info-split' of git://git.hohndel.org/subsurface
* 'info-split' of git://git.hohndel.org/subsurface:
Add statistics for longest, shortest, and shallowest dive
Create separate single dive and total stats pages
Separate out single dive statistics and total statistics
Dirk Hohndel [Sun, 15 Jan 2012 23:21:56 +0000 (15:21 -0800)]
Add statistics for longest, shortest, and shallowest dive
I don't really like calling the shallowest dive "min depth", but all other
texts that I could come up with that were reasonably short weren't any
better...
Dirk Hohndel [Sun, 15 Jan 2012 21:19:39 +0000 (13:19 -0800)]
Separate out single dive statistics and total statistics
Right now this just changes the infrastructure - nothing outside of
statistics.c is modified. This is simply in preparation to split out the
single dive info and the total dive statistics in the future (as we are
creating more info and more stats and they will overflow the screen area
available - so this will turn into two notebook tabs).
Use a more standard approach to save preferences on MacOSX
CFPreferences* seems to be the proper way to handle preferences on MacOSX.
This approach also eliminates a problem where the hard coded preferences
path couldn't be read.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
[ fixed small coding style issues ] Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Linus Torvalds [Sun, 1 Jan 2012 23:12:28 +0000 (15:12 -0800)]
First try at converting user-manual to AsciiDoc
You can do "make doc" in the main directory to create the html version,
and if you want to play around with it, do "make show" in the
Documentation subdirectory to start firefox on the end result.
It's by no means perfect, but it gives somewhat reasonable results, and
this is enough initial work for people to play around with, I think.
NOTE! You need "asciidoc" installed to do this: it's a python program,
so it should be pretty easy even on non-Linux platforms. And on Linux,
most distributions package it, so you just have to do something like
yum install asciidoc
to get it (replace with apt-get/zypper/whatever).
Asciidoc can generate other output too (man-pages, LaTeX, etc), maybe
people want to play with that part too.
Linus Torvalds [Fri, 30 Dec 2011 21:09:17 +0000 (13:09 -0800)]
Move the gasmix cleanups from XML parsing to the generic dive fixup stage
Right now we do certain cylinder info operations only when importing
from an XML file, which is wrong. In particular, we do the "is the
gasmix air" or "what is the standard cylinder name" only at XML read
time, which means that if you import a dive directly from the dive
computer, it won't have the air sanitization or the proper default
cylinder names.
Of course, most dive computers don't actually save enough cylinder
information for us to do the cylinder name lookup anyway, but some do.
And all Nitrox-capable dive computers do have that O2 percentage that
needs cleanup too.
Reported-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix incorrect utf-8 in Documentation/user-manual.txt
Not sure, but us-ascii might have been intended.
Signed-off-by: Cristian Ionescu-Idbohrn <cii@axis.com>
[ And even if you do want to use utf8, you should use it correctly, not
with this "pick random character" approach - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jacco van Koll [Fri, 23 Dec 2011 18:43:58 +0000 (19:43 +0100)]
Version 0.0.6 of user manual
Corrected some typo's
Modified chapter 12. Importing dives from JDivelogAdded chapter 13.
Importing dives from Suunto Divemanager 3.*
Added Appendix B: very tiny example script for importing Suunto
Divemanager 3.* xml files
Signed-off-by: Jacco van Koll <jacco.van.koll@gmail.com> Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Linus Torvalds [Mon, 19 Dec 2011 02:30:31 +0000 (18:30 -0800)]
parse-xml: read the file into memory separately
Using xmlParseFile() was simple, but I'm planning on extending the file
parsing past just XML, since we want to be able to import other formats
too. And quite frankly, that means that we'll want to read the file
into memory to look at it before we start parsing it.
We could decide do it by file extensions too, and I'll look at that
approach as well, but regardless of how we do things it's almost
certainly a good idea to do the file access in one place. The XML
parsing might as well happen from a memory buffer instead anyway.
Miika Turkia [Sun, 18 Dec 2011 12:36:28 +0000 (14:36 +0200)]
Multiple cylinder support for JDiveLog import
Support for multiple cylinders and gas change events when Importing
JDiveLog logs to Subsurface. This is tested with manually crafted data
and not real data (originating from dive computer).
NOTE: Subsurface does not handle importing multiple cylinders
correctly but imports only the first cylinder. However, manually
converting data to a file and opening that in Subsurface works
correctly.
(xsltproc jdivelog2subsurface.xslt jdivelog-gas.jlb > gas.xml)
Some minor tweaking on importing JDiveLog specific fields to notes
fields in Subsurface is also included.
Linus Torvalds [Thu, 15 Dec 2011 02:19:48 +0000 (18:19 -0800)]
Merge branch 'forlinus' of git://git.hohndel.org/subsurface
* 'forlinus' of git://git.hohndel.org/subsurface:
Improve Makefile for MacOS
Add reasonable default device names for divecomputer import
More intuitive label for "not saving" when exiting
Dirk Hohndel [Wed, 14 Dec 2011 19:22:12 +0000 (11:22 -0800)]
Improve Makefile for MacOS
Some macs appear to need "-framework CoreFoundation" added to the linking
step, others (which appear to have the exact same OS and tools installed),
don't. But as it doesn't appeart to hurt, I unconditionally add this.
Switched to using pkgconfig to find libdivecomputer on the Mac.
Tried to clean up the Makefile a bit
Signed-off-by: Dirk Hohndel <dirk@hohndel.org> Acked-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Dirk Hohndel [Wed, 14 Dec 2011 04:34:56 +0000 (20:34 -0800)]
Add reasonable default device names for divecomputer import
So far we hard coded /dev/ttyUSB0 - which is a good starting point in
Linux but not so useful on Windows or MacOS. This was now moved into one
of our OS helper functions with (somewhat) reasonable defaults.
Dirk Hohndel [Tue, 13 Dec 2011 22:34:42 +0000 (14:34 -0800)]
More intuitive label for "not saving" when exiting
Right now the options are "Save" and "Cancel". I wrote that code and it
always bugged me - "Cancel" could mean that I want to cancel the the whole
operation, i.e. that I don't want to quit after all. Showing "Save" and
"No" seems much more logical.
Linus Torvalds [Mon, 12 Dec 2011 19:20:36 +0000 (11:20 -0800)]
Merge branch 'forlinus' of git://git.hohndel.org/subsurface
* 'forlinus' of git://git.hohndel.org/subsurface:
Small improvement to plot info debugging code
Add three more trimix test dives
Make test dive 15 a bit more useful
Two test dives I added a couple of months ago
Add libxslt to Windows packaging file
Linus Torvalds [Mon, 12 Dec 2011 17:24:47 +0000 (09:24 -0800)]
Pack the star rating on a line of its own
Packing it next to the divemaster/buddy information may work great on a
big screen with lots of pixes, but it makes the minimum window size way
wide for a small screen. So don't do it.
Linus Torvalds [Mon, 12 Dec 2011 17:20:22 +0000 (09:20 -0800)]
divelist: show/sort nitrox dive oxygen percentage as a range
If you are diving multiple nitrox cylinders, we now show them as a range
instead of just the max. We'll still sort by max O2 (and for the same
max, by min O2).
So now with trimix dives, we'll show the bottom gas (we assume that
"highest He percentage" is that bottom gas), for nitrox dives we'll show
the range of Oxygen percentage, and for all-air dives we'll show just
"air".
For simple nitrox dives (only a single mix), we'll obviously show just
that single percentage. This should hopefully conclude the whole "show
multiple cylinders in dive list" mess.
Linus Torvalds [Mon, 12 Dec 2011 05:28:18 +0000 (21:28 -0800)]
Make the dive gas record the single highest mix
.. using the regular sorting rules: sort by Helium content first, Oxygen
content second. Air always sorts last (even behind the theoretical
hypoxic Nitrox that nobody sane would use).
This is what Don Kinney implies would be the natural thing for a trimix
diver.
Linus Torvalds [Sun, 11 Dec 2011 22:38:58 +0000 (14:38 -0800)]
Add capability of custom sorts to divelist columns
.. and use this for the nitrox column, which can now be more complex
than just a single number.
The rule for the "nitrox" column is now:
- we look up the highest Oxygen and Helium mix for the dive
(Note: we look them up independently, so if you have a EAN50 deco
bottle, and a 20% Helium low-oxygen bottle for the deep portion, then
we'll consider the dive to be a "50% Oxygen, 20% Helium" dive, even
though you obviously never used that combination at the same time)
- we sort by Helium first, Oxygen second. So a dive with a 10% Helium
mix is considered to be "stronger" than a 50% Nitrox mix.
- If Helium is non-zero, we show "O2/He", otherwise we show just "O2"
(or "air"). So "21/20" means "21% oxygen, 20% Helium", while "40"
means "Ean 40".
- I got rid of the decimals. We save them, and you can see them in the
dive equipment details, but for the dive list we just use rounded
percentages.
Let's see how many bugs I introduced. I don't actually have any trimix
dives, but I edited a few for (very limited) testing.
Linus Torvalds [Sun, 11 Dec 2011 20:03:55 +0000 (12:03 -0800)]
Add the "Common European Cylinders" as per Henrik
This is Henrik's list of common metric sized cylinders, although my
experience differs from this one. In Cyprus, I was diving double 12L
cylinders, but they were 200 bar, not the 232 bar ones Henrik has on the
list.
Also, I really think we should just have a checkbox for "double" instead
of naming them explicitly like this. Henrik does have the 12L 200 bar
ones in his singles list.
But as a stop-gap, I'm just taking the values from Henrik's patch, but
converted to the new cleaned-up reference tank model setup.
Based-on-patch-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 11 Dec 2011 19:54:17 +0000 (11:54 -0800)]
Clean up reference tank information table
This makes the reference tanks ("struct tank_info") use a saner format
which specifies explicitly whether the size is in ml or cubic feet, and
whether the pressure is in psi or bar.
So instead of having magic rules ("size is in cuft if < 1000, otherwise
mliter"), just set the size explicitly:
and then the code can just convert to standard measurements without any
odd rules, and the initialization table becomes self-explanatory too.
This is in preparation for doing the metric tanks with pressure: Henrik
Aronsen sent a really ugly patch using the previous setup, I just
couldn't stand the additional hackery.
Linus Torvalds [Sun, 11 Dec 2011 19:40:17 +0000 (11:40 -0800)]
Make the cylinder table columns unsortable
They were never intended to be sortable, but using common code with the
dive list picked up that "sort by index" thing by mistake.
If we really want to be able to sort cylinders by O2 percentage (which
really doesn't seem to make much sense, considering that you usually
have just one or two cylinders) we will need to also handle the case of
editing the (differently sorted) cylinder table. Which we don't do now.
Reported-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 11 Dec 2011 19:09:37 +0000 (11:09 -0800)]
Allow editing of Helium values in cylinder info
Henrik Aronsen points out that we've not made it possible to edit the He
percentages for trimix diving. It's easy enough to do, I just didn't
have any dives that needed it myself. So here goes.
Reported-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 9 Dec 2011 17:52:59 +0000 (09:52 -0800)]
Use common helper function for the "no cylinder info" case
Miika fixed the statistics code that didn't properly check for the "no
cylinder info" case - this cleans it up and just uses the helper
function in equipment.c.
Rename the helper to be slightly better named while at it.
Dirk Hohndel [Wed, 7 Dec 2011 19:58:16 +0000 (11:58 -0800)]
Add typical 0 to 5 star rating for dives
This works ok-ish, but doesn't allow us to click on the stars and edit
them in the divelist, which a user might expect to be able to do - in
most "star rating UIs" you simply click on the n-th star to set that
rating. Here you need to edit the dive and pick the rating from a drop
down menu.
Minor oddity: you can actually (if you force it) write anything you want
into the star rating. But anything that isn't one of the predefined
strings simply results in a zero star rating.
Overall the UI feels a bit... forced. But I think this is quite useful
anyway.
Linus Torvalds [Tue, 6 Dec 2011 21:00:01 +0000 (13:00 -0800)]
Add shorthand actions for showing just one of the panes
Currently just tied to F1-F4 (for divelist, profile, info, and "all
three" respectively), which is just crazy. But using "ctrl-P" for
"Profile" isn't sane either, that's the standard printer keyboard
shortcut. So what would be good keyboard shortcuts for these things?
I also wonder how I can get gtk to shut up about the fact that a pane
becomes too small for the contents of that pane? We very much want to do
that, and it's very intentional. Gtk does the right thing apart from
the whining (and apart from the visually ugly part of a widget that
doesn't fit, but making it pretty doesn't really seem possible).
The profile colors were defined all over the place, so I put them all in one spot. I'm unsure if this is the best solution to that problem, but I guess it's a step in the right direction.
Signed-Off-By: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Linus Torvalds [Sun, 27 Nov 2011 20:07:49 +0000 (12:07 -0800)]
Merge branch 'windows-fixes' of git://git.hohndel.org/subsurface
* 'windows-fixes' of git://git.hohndel.org/subsurface:
fix mingw-win32 specific warnings in libdivecomputer.c
Fix mingw-make.sh to find correct xslt-config
Dirk Hohndel [Sun, 27 Nov 2011 17:10:37 +0000 (09:10 -0800)]
fix mingw-win32 specific warnings in libdivecomputer.c
1) since %lld is not defined in the MSVC runtime, use
the portable PRId64 macro from inttypes.h for 64bit integers
notice in inttypes.h from mingw-win32:
/* 7.8.1 Macros for format specifiers
*
* MS runtime does not yet understand C9x standard "ll"
* length specifier. It appears to treat "ll" as "l".
* The non-standard I64 length specifier causes warning in GCC,
* but understood by MS runtime functions.
*/
2) include unistd.h to disable warning:
warning: implicit declaration of function 'usleep'
Lubomir's code then caused a warning building natively under Linux, which
I fixed as well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org> Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
projects / ext / subsurface.git / log