+/* profile.c */
+/* creates all the necessary data for drawing the dive profile
+ * uses cairo to draw it
+ */
#include <stdio.h>
#include <stdlib.h>
#include <stdarg.h>
int selected_dive = 0;
+typedef enum { STABLE, SLOW, MODERATE, FAST, CRAZY } velocity_t;
/* Plot info with smoothing, velocity indication
* and one-, two- and three-minute minimums and maximums */
struct plot_info {
int maxtime;
int meandepth, maxdepth;
int minpressure, maxpressure;
+ int endpressure; /* start pressure better be max pressure */
int mintemp, maxtemp;
struct plot_data {
+ unsigned int same_cylinder:1;
+ unsigned int cylinderindex;
int sec;
- int pressure, temperature;
+ /* pressure[0] is sensor pressure
+ * pressure[1] is interpolated pressure */
+ int pressure[2];
+ int temperature;
/* Depth info */
- int val;
+ int depth;
int smoothed;
- enum { STABLE, SLOW, MODERATE, FAST, CRAZY } velocity;
+ velocity_t velocity;
struct plot_data *min[3];
struct plot_data *max[3];
int avg[3];
} entry[];
};
+#define SENSOR_PR 0
+#define INTERPOLATED_PR 1
+#define SENSOR_PRESSURE(_entry) (_entry)->pressure[SENSOR_PR]
+#define INTERPOLATED_PRESSURE(_entry) (_entry)->pressure[INTERPOLATED_PR]
/* convert velocity to colors */
typedef struct { double r, g, b; } rgb_t;
static void set_source_rgba(struct graphics_context *gc, double r, double g, double b, double a)
{
+ /*
+ * For printers, we still honor 'a', but ignore colors
+ * for now. Black is white and white is black
+ */
if (gc->printer) {
- /* Black is white and white is black */
double sum = r+g+b;
- if (sum > 2)
+ if (sum > 0.8)
r = g = b = 0;
- else if (sum < 1)
+ else
r = g = b = 1;
}
cairo_set_source_rgba(gc->cr, r, g, b, a);
}
-static void set_source_rgb(struct graphics_context *gc, double r, double g, double b)
+void set_source_rgb(struct graphics_context *gc, double r, double g, double b)
{
set_source_rgba(gc, r, g, b, 1);
}
cairo_show_text(cr, buffer);
}
+static void plot_one_event(struct graphics_context *gc, struct plot_info *pi, struct event *event, const text_render_options_t *tro)
+{
+ int i, depth = 0;
+ int x,y;
+
+ for (i = 0; i < pi->nr; i++) {
+ struct plot_data *data = pi->entry + i;
+ if (event->time.seconds < data->sec)
+ break;
+ depth = data->depth;
+ }
+ /* draw a little tirangular marker and attach tooltip */
+ x = SCALEX(gc, event->time.seconds);
+ y = SCALEY(gc, depth);
+ set_source_rgba(gc, 1.0, 1.0, 0.1, 0.8);
+ cairo_move_to(gc->cr, x-15, y+6);
+ cairo_line_to(gc->cr, x-3 , y+6);
+ cairo_line_to(gc->cr, x-9, y-6);
+ cairo_line_to(gc->cr, x-15, y+6);
+ cairo_stroke_preserve(gc->cr);
+ cairo_fill(gc->cr);
+ set_source_rgba(gc, 0.0, 0.0, 0.0, 0.8);
+ cairo_move_to(gc->cr, x-9, y-3);
+ cairo_line_to(gc->cr, x-9, y+1);
+ cairo_move_to(gc->cr, x-9, y+4);
+ cairo_line_to(gc->cr, x-9, y+4);
+ cairo_stroke(gc->cr);
+ attach_tooltip(x-15, y-6, 12, 12, event->name);
+}
+
+static void plot_events(struct graphics_context *gc, struct plot_info *pi, struct dive *dive)
+{
+ static const text_render_options_t tro = {14, 1.0, 0.2, 0.2, CENTER, TOP};
+ struct event *event = dive->events;
+
+ if (gc->printer)
+ return;
+
+ while (event) {
+ plot_one_event(gc, pi, event, &tro);
+ event = event->next;
+ }
+}
+
static void render_depth_sample(struct graphics_context *gc, struct plot_data *entry, const text_render_options_t *tro)
{
- int sec = entry->sec;
- depth_t depth = { entry->val };
- const char *fmt;
+ int sec = entry->sec, decimals;
double d;
- switch (output_units.length) {
- case METERS:
- d = depth.mm / 1000.0;
- fmt = "%.1f";
- break;
- case FEET:
- d = to_feet(depth);
- fmt = "%.0f";
- break;
- }
- plot_text(gc, tro, sec, depth.mm, fmt, d);
+ d = get_depth_units(entry->depth, &decimals, NULL);
+
+ plot_text(gc, tro, sec, entry->depth, "%.*f", decimals, d);
}
static void plot_text_samples(struct graphics_context *gc, struct plot_info *pi)
for (i = 0; i < pi->nr; i++) {
struct plot_data *entry = pi->entry + i;
- if (entry->val < 2000)
+ if (entry->depth < 2000)
continue;
if (entry == entry->max[2])
int i;
struct plot_data *entry = pi->entry;
- cairo_set_source_rgba(gc->cr, 1, 0.2, 0.2, 0.20);
+ set_source_rgba(gc, 1, 0.2, 0.2, 0.20);
move_to(gc, entry->sec, entry->smoothed);
for (i = 1; i < pi->nr; i++) {
entry++;
int i;
struct plot_data *entry = pi->entry;
- cairo_set_source_rgba(gc->cr, 1, 0.2, 1, a);
- move_to(gc, entry->sec, entry->min[index]->val);
+ set_source_rgba(gc, 1, 0.2, 1, a);
+ move_to(gc, entry->sec, entry->min[index]->depth);
for (i = 1; i < pi->nr; i++) {
entry++;
- line_to(gc, entry->sec, entry->min[index]->val);
+ line_to(gc, entry->sec, entry->min[index]->depth);
}
for (i = 1; i < pi->nr; i++) {
- line_to(gc, entry->sec, entry->max[index]->val);
+ line_to(gc, entry->sec, entry->max[index]->depth);
entry--;
}
cairo_close_path(gc->cr);
{
int i;
cairo_t *cr = gc->cr;
- int ends, sec, depth;
- int *secs;
- int *depths;
+ int sec, depth;
struct plot_data *entry;
int maxtime, maxdepth, marker;
cairo_stroke(cr);
/* Show mean depth */
- set_source_rgba(gc, 1, 0.2, 0.2, 0.40);
- move_to(gc, 0, pi->meandepth);
- line_to(gc, 1, pi->meandepth);
- cairo_stroke(cr);
+ if (! gc->printer) {
+ set_source_rgba(gc, 1, 0.2, 0.2, 0.40);
+ move_to(gc, 0, pi->meandepth);
+ line_to(gc, 1, pi->meandepth);
+ cairo_stroke(cr);
+ }
gc->leftx = 0; gc->rightx = maxtime;
- plot_smoothed_profile(gc, pi);
- plot_minmax_profile(gc, pi);
-
- entry = pi->entry;
- set_source_rgba(gc, 1, 0.2, 0.2, 0.80);
- secs = (int *) malloc(sizeof(int) * pi->nr);
- depths = (int *) malloc(sizeof(int) * pi->nr);
- secs[0] = entry->sec;
- depths[0] = entry->val;
- for (i = 1; i < pi->nr; i++) {
- entry++;
- sec = entry->sec;
- if (sec <= maxtime || entry->val > 0) {
- /* we want to draw the segments in different colors
- * representing the vertical velocity, so we need to
- * chop this into short segments */
- rgb_t color = rgb[entry->velocity];
- depth = entry->val;
- set_source_rgb(gc, color.r, color.g, color.b);
- move_to(gc, secs[i-1], depths[i-1]);
- line_to(gc, sec, depth);
- cairo_stroke(cr);
- ends = i;
- }
- secs[i] = sec;
- depths[i] = depth;
+ /*
+ * These are good for debugging text placement etc,
+ * but not for actual display..
+ */
+ if (0) {
+ plot_smoothed_profile(gc, pi);
+ plot_minmax_profile(gc, pi);
}
- move_to(gc, secs[ends], depths[ends]);
- gc->topy = 0; gc->bottomy = 1.0;
- line_to(gc, secs[ends], 0);
- line_to(gc, secs[0], 0);
- cairo_close_path(cr);
+
set_source_rgba(gc, 1, 0.2, 0.2, 0.80);
- cairo_stroke(cr);
- /* now do it again for the neat fill */
+
+ /* Do the depth profile for the neat fill */
gc->topy = 0; gc->bottomy = maxdepth;
set_source_rgba(gc, 1, 0.2, 0.2, 0.20);
- move_to(gc, secs[0], depths[0]);
- for (i = 1; i <= ends; i++) {
- line_to(gc, secs[i],depths[i]);
- }
- gc->topy = 0; gc->bottomy = 1.0;
- line_to(gc, secs[ends], 0);
- line_to(gc, secs[0], 0);
+
+ entry = pi->entry;
+ move_to(gc, 0, 0);
+ for (i = 0; i < pi->nr; i++, entry++)
+ line_to(gc, entry->sec, entry->depth);
cairo_close_path(gc->cr);
+ if (gc->printer) {
+ set_source_rgba(gc, 1, 1, 1, 0.2);
+ cairo_fill_preserve(cr);
+ set_source_rgb(gc, 1, 1, 1);
+ cairo_stroke(cr);
+ return;
+ }
cairo_fill(gc->cr);
+
+ /* Now do it again for the velocity colors */
+ entry = pi->entry;
+ for (i = 1; i < pi->nr; i++) {
+ entry++;
+ sec = entry->sec;
+ /* we want to draw the segments in different colors
+ * representing the vertical velocity, so we need to
+ * chop this into short segments */
+ rgb_t color = rgb[entry->velocity];
+ depth = entry->depth;
+ set_source_rgb(gc, color.r, color.g, color.b);
+ move_to(gc, entry[-1].sec, entry[-1].depth);
+ line_to(gc, sec, depth);
+ cairo_stroke(cr);
+ }
}
static int setup_temperature_limits(struct graphics_context *gc, struct plot_info *pi)
if (output_units.temperature == FAHRENHEIT) {
deg = to_F(temperature);
- unit = "F";
+ unit = UTF8_DEGREE "F";
} else {
deg = to_C(temperature);
- unit = "C";
+ unit = UTF8_DEGREE "C";
}
- plot_text(gc, &tro, sec, temperature.mkelvin, "%d %s", deg, unit);
+ plot_text(gc, &tro, sec, temperature.mkelvin, "%d%s", deg, unit);
}
static void plot_temperature_text(struct graphics_context *gc, struct plot_info *pi)
gc->leftx = 0;
gc->rightx = get_maxtime(pi);
- gc->topy = 0; gc->bottomy = pi->maxpressure * 1.5;
+ gc->bottomy = 0; gc->topy = pi->maxpressure * 1.5;
return pi->maxpressure != 0;
}
-static void plot_cylinder_pressure(struct graphics_context *gc, struct plot_info *pi)
+static void plot_pressure_helper(struct graphics_context *gc, struct plot_info *pi, int type)
{
int i;
+ int lift_pen = FALSE;
- if (!get_cylinder_pressure_range(gc, pi))
- return;
-
- cairo_set_source_rgba(gc->cr, 0.2, 1.0, 0.2, 0.80);
-
- move_to(gc, 0, pi->maxpressure);
- for (i = 1; i < pi->nr; i++) {
+ for (i = 0; i < pi->nr; i++) {
int mbar;
struct plot_data *entry = pi->entry + i;
- mbar = entry->pressure;
- if (!mbar)
+ mbar = entry->pressure[type];
+ if (!entry->same_cylinder)
+ lift_pen = TRUE;
+ if (!mbar) {
+ lift_pen = TRUE;
continue;
- line_to(gc, entry->sec, mbar);
+ }
+ if (lift_pen) {
+ if (i > 0 && entry->same_cylinder) {
+ /* if we have a previous event from the same tank,
+ * draw at least a short line .
+ * This uses the implementation detail that the
+ * type is either 0 or 1 */
+ int prev_pr;
+ prev_pr = (entry-1)->pressure[type] ? : (entry-1)->pressure[1 - type];
+ move_to(gc, (entry-1)->sec, prev_pr);
+ line_to(gc, entry->sec, mbar);
+ } else
+ move_to(gc, entry->sec, mbar);
+ lift_pen = FALSE;
+ }
+ else
+ line_to(gc, entry->sec, mbar);
}
- line_to(gc, pi->maxtime, pi->minpressure);
cairo_stroke(gc->cr);
+
}
-/*
- * Return air usage (in liters).
- */
-static double calculate_airuse(struct dive *dive)
+static void plot_cylinder_pressure(struct graphics_context *gc, struct plot_info *pi)
{
- double airuse = 0;
- int i;
-
- for (i = 0; i < MAX_CYLINDERS; i++) {
- cylinder_t *cyl = dive->cylinder + i;
- int size = cyl->type.size.mliter;
- double kilo_atm;
+ if (!get_cylinder_pressure_range(gc, pi))
+ return;
- if (!size)
- continue;
+ /* first plot the pressure readings we have from the dive computer */
+ set_source_rgba(gc, 0.2, 1.0, 0.2, 0.80);
+ plot_pressure_helper(gc, pi, SENSOR_PR);
- kilo_atm = (cyl->start.mbar - cyl->end.mbar) / 1013250.0;
+ /* then, in a different color, the interpolated values */
+ set_source_rgba(gc, 1.0, 1.0, 0.2, 0.80);
+ plot_pressure_helper(gc, pi, INTERPOLATED_PR);
+}
- /* Liters of air at 1 atm == milliliters at 1k atm*/
- airuse += kilo_atm * size;
- }
- return airuse;
+static int mbar_to_PSI(int mbar)
+{
+ pressure_t p = {mbar};
+ return to_PSI(p);
}
-static void plot_info(struct dive *dive, struct graphics_context *gc)
+static void plot_pressure_value(struct graphics_context *gc, int mbar, int sec,
+ int xalign, int yalign)
{
- text_render_options_t tro = {10, 0.2, 1.0, 0.2, RIGHT, BOTTOM};
- const double liters_per_cuft = 28.317;
- const char *unit, *format, *desc;
- double airuse;
- char buffer1[80];
- char buffer2[80];
- int len;
+ int pressure;
+ const char *unit;
- airuse = calculate_airuse(dive);
- if (!airuse) {
- update_air_info(NULL);
- return;
- }
- switch (output_units.volume) {
- case LITER:
- unit = "l";
- format = "vol: %4.0f %s";
+ switch (output_units.pressure) {
+ case PASCAL:
+ pressure = mbar * 100;
+ unit = "pascal";
+ break;
+ case BAR:
+ pressure = (mbar + 500) / 1000;
+ unit = "bar";
break;
- case CUFT:
- unit = "cuft";
- format = "vol: %4.2f %s";
- airuse /= liters_per_cuft;
+ case PSI:
+ pressure = mbar_to_PSI(mbar);
+ unit = "psi";
break;
}
- tro.vpos = -1.0;
- plot_text(gc, &tro, 0.98, 0.98, format, airuse, unit);
- len = snprintf(buffer1, sizeof(buffer1), format, airuse, unit);
- tro.vpos = -2.2;
- if (dive->duration.seconds) {
- double pressure = 1 + (dive->meandepth.mm / 10000.0);
- double sac = airuse / pressure * 60 / dive->duration.seconds;
- plot_text(gc, &tro, 0.98, 0.98, "SAC: %4.2f %s/min", sac, unit);
- snprintf(buffer1+len, sizeof(buffer1)-len,
- "\nSAC: %4.2f %s/min", sac, unit);
- }
- len = 0;
- tro.vpos = -3.4;
- desc = dive->cylinder[0].type.description;
- if (desc || dive->cylinder[0].gasmix.o2.permille) {
- int o2 = dive->cylinder[0].gasmix.o2.permille / 10;
- if (!desc)
- desc = "";
- if (!o2)
- o2 = 21;
- plot_text(gc, &tro, 0.98, 0.98, "%s (%d%%)", desc, o2);
- len = snprintf(buffer2, sizeof(buffer2), "%s (%d%%): used ", desc, o2);
- }
- snprintf(buffer2+len, sizeof(buffer2)-len, buffer1);
- update_air_info(buffer2);
-}
-
-static int mbar_to_PSI(int mbar)
-{
- pressure_t p = {mbar};
- return to_PSI(p);
+ text_render_options_t tro = {10, 0.2, 1.0, 0.2, xalign, yalign};
+ plot_text(gc, &tro, sec, mbar, "%d %s", pressure, unit);
}
static void plot_cylinder_pressure_text(struct graphics_context *gc, struct plot_info *pi)
{
- if (get_cylinder_pressure_range(gc, pi)) {
- int start, end;
- const char *unit = "bar";
+ int i;
+ int mbar, cyl;
+ int seen_cyl[MAX_CYLINDERS] = { FALSE, };
+ int last_pressure[MAX_CYLINDERS] = { 0, };
+ int last_time[MAX_CYLINDERS] = { 0, };
+ struct plot_data *entry;
- switch (output_units.pressure) {
- case PASCAL:
- start = pi->maxpressure * 100;
- end = pi->minpressure * 100;
- unit = "pascal";
- break;
- case BAR:
- start = (pi->maxpressure + 500) / 1000;
- end = (pi->minpressure + 500) / 1000;
- unit = "bar";
- break;
- case PSI:
- start = mbar_to_PSI(pi->maxpressure);
- end = mbar_to_PSI(pi->minpressure);
- unit = "psi";
- break;
+ if (!get_cylinder_pressure_range(gc, pi))
+ return;
+
+ /* only loop over the actual events from the dive computer */
+ for (i = 2; i < pi->nr - 2; i++) {
+ entry = pi->entry + i;
+
+ if (!entry->same_cylinder) {
+ cyl = entry->cylinderindex;
+ if (!seen_cyl[cyl]) {
+ mbar = SENSOR_PRESSURE(entry) ? : INTERPOLATED_PRESSURE(entry);
+ plot_pressure_value(gc, mbar, entry->sec, LEFT, BOTTOM);
+ seen_cyl[cyl] = TRUE;
+ }
+ if (i > 2) {
+ /* remember the last pressure and time of
+ * the previous cylinder */
+ cyl = (entry - 1)->cylinderindex;
+ last_pressure[cyl] =
+ SENSOR_PRESSURE(entry - 1) ? : INTERPOLATED_PRESSURE(entry - 1);
+ last_time[cyl] = (entry - 1)->sec;
+ }
}
+ }
+ cyl = entry->cylinderindex;
+ last_pressure[cyl] = SENSOR_PRESSURE(entry) ? : INTERPOLATED_PRESSURE(entry);
+ last_time[cyl] = entry->sec;
- text_render_options_t tro = {10, 0.2, 1.0, 0.2, LEFT, TOP};
- plot_text(gc, &tro, 0, pi->maxpressure, "%d %s", start, unit);
- plot_text(gc, &tro, pi->maxtime, pi->minpressure,
- "%d %s", end, unit);
+ for (cyl = 0; cyl < MAX_CYLINDERS; cyl++) {
+ if (last_time[cyl]) {
+ plot_pressure_value(gc, last_pressure[cyl], last_time[cyl], CENTER, TOP);
+ }
}
}
/* Then go forward until we hit an entry past the time */
min = max = p;
- avg = p->val;
+ avg = p->depth;
nr = 1;
while (++p < last) {
- int val = p->val;
+ int depth = p->depth;
if (p->sec > time + seconds)
break;
- avg += val;
+ avg += depth;
nr ++;
- if (val < min->val)
+ if (depth < min->depth)
min = p;
- if (val > max->val)
+ if (depth > max->depth)
max = p;
}
entry->min[index] = min;
analyze_plot_info_minmax_minute(entry, first, last, 2);
}
+static velocity_t velocity(int speed)
+{
+ velocity_t v;
+
+ if (speed < -304) /* ascent faster than -60ft/min */
+ v = CRAZY;
+ else if (speed < -152) /* above -30ft/min */
+ v = FAST;
+ else if (speed < -76) /* -15ft/min */
+ v = MODERATE;
+ else if (speed < -25) /* -5ft/min */
+ v = SLOW;
+ else if (speed < 25) /* very hard to find data, but it appears that the recommendations
+ for descent are usually about 2x ascent rate; still, we want
+ stable to mean stable */
+ v = STABLE;
+ else if (speed < 152) /* between 5 and 30ft/min is considered slow */
+ v = SLOW;
+ else if (speed < 304) /* up to 60ft/min is moderate */
+ v = MODERATE;
+ else if (speed < 507) /* up to 100ft/min is fast */
+ v = FAST;
+ else /* more than that is just crazy - you'll blow your ears out */
+ v = CRAZY;
+
+ return v;
+}
static struct plot_info *analyze_plot_info(struct plot_info *pi)
{
int i;
/* Do pressure min/max based on the non-surface data */
for (i = 0; i < nr; i++) {
struct plot_data *entry = pi->entry+i;
- int pressure = entry->pressure;
+ int pressure = SENSOR_PRESSURE(entry) ? : INTERPOLATED_PRESSURE(entry);
int temperature = entry->temperature;
if (pressure) {
}
/* Smoothing function: 5-point triangular smooth */
- for (i = 2; i < nr-1; i++) {
+ for (i = 2; i < nr; i++) {
struct plot_data *entry = pi->entry+i;
- int val;
+ int depth;
if (i < nr-2) {
- val = entry[-2].val + 2*entry[-1].val + 3*entry[0].val + 2*entry[1].val + entry[2].val;
- entry->smoothed = (val+4) / 9;
+ depth = entry[-2].depth + 2*entry[-1].depth + 3*entry[0].depth + 2*entry[1].depth + entry[2].depth;
+ entry->smoothed = (depth+4) / 9;
}
/* vertical velocity in mm/sec */
+ /* Linus wants to smooth this - let's at least look at the samples that aren't FAST or CRAZY */
if (entry[0].sec - entry[-1].sec) {
- val = (entry[0].val - entry[-1].val) / (entry[0].sec - entry[-1].sec);
- if (val < -304) /* ascent faster than -60ft/min */
- entry->velocity = CRAZY;
- else if (val < -152) /* above -30ft/min */
- entry->velocity = FAST;
- else if (val < -76) /* -15ft/min */
- entry->velocity = MODERATE;
- else if (val < -25) /* -5ft/min */
- entry->velocity = SLOW;
- else if (val < 25) /* very hard to find data, but it appears that the recommendations
- for descent are usually about 2x ascent rate; still, we want
- stable to mean stable */
- entry->velocity = STABLE;
- else if (val < 152) /* between 5 and 30ft/min is considered slow */
- entry->velocity = SLOW;
- else if (val < 304) /* up to 60ft/min is moderate */
- entry->velocity = MODERATE;
- else if (val < 507) /* up to 100ft/min is fast */
- entry->velocity = FAST;
- else /* more than that is just crazy - you'll blow your ears out */
- entry->velocity = CRAZY;
+ entry->velocity = velocity((entry[0].depth - entry[-1].depth) / (entry[0].sec - entry[-1].sec));
+ /* if our samples are short and we aren't too FAST*/
+ if (entry[0].sec - entry[-1].sec < 15 && entry->velocity < FAST) {
+ int past = -2;
+ while (i+past > 0 && entry[0].sec - entry[past].sec < 15)
+ past--;
+ entry->velocity = velocity((entry[0].depth - entry[past].depth) /
+ (entry[0].sec - entry[past].sec));
+ }
} else
entry->velocity = STABLE;
}
return pi;
}
+/*
+ * simple structure to track the beginning and end tank pressure as
+ * well as the integral of depth over time spent while we have no
+ * pressure reading from the tank */
+typedef struct pr_track_struct pr_track_t;
+struct pr_track_struct {
+ int start;
+ int end;
+ int t_start;
+ int t_end;
+ double pressure_time;
+ pr_track_t *next;
+};
+
+static pr_track_t *pr_track_alloc(int start, int t_start) {
+ pr_track_t *pt = malloc(sizeof(pr_track_t));
+ pt->start = start;
+ pt->t_start = t_start;
+ pt->end = 0;
+ pt->t_end = 0;
+ pt->pressure_time = 0.0;
+ pt->next = NULL;
+ return pt;
+}
+
+/* poor man's linked list */
+static pr_track_t *list_last(pr_track_t *list)
+{
+ pr_track_t *tail = list;
+ if (!tail)
+ return NULL;
+ while (tail->next) {
+ tail = tail->next;
+ }
+ return tail;
+}
+
+static pr_track_t *list_add(pr_track_t *list, pr_track_t *element)
+{
+ pr_track_t *tail = list_last(list);
+ if (!tail)
+ return element;
+ tail->next = element;
+ return list;
+}
+
+static void list_free(pr_track_t *list)
+{
+ if (!list)
+ return;
+ list_free(list->next);
+ free(list);
+}
+
+static void fill_missing_tank_pressures(struct dive *dive, struct plot_info *pi,
+ pr_track_t **track_pr)
+{
+ pr_track_t *list = NULL;
+ pr_track_t *nlist = NULL;
+ double pt, magic;
+ int cyl, i;
+ struct plot_data *entry;
+ int cur_pr[MAX_CYLINDERS];
+
+ for (cyl = 0; cyl < MAX_CYLINDERS; cyl++) {
+ cur_pr[cyl] = track_pr[cyl]->start;
+ }
+ for (i = 0; i < dive->samples; i++) {
+ entry = pi->entry + i + 2;
+ if (SENSOR_PRESSURE(entry)) {
+ cur_pr[entry->cylinderindex] = SENSOR_PRESSURE(entry);
+ } else {
+ if(!list || list->t_end < entry->sec) {
+ nlist = track_pr[entry->cylinderindex];
+ list = NULL;
+ while (nlist && nlist->t_start <= entry->sec) {
+ list = nlist;
+ nlist = list->next;
+ }
+ /* there may be multiple segments - so
+ * let's assemble the length */
+ nlist = list;
+ pt = list->pressure_time;
+ while (!nlist->end) {
+ nlist = nlist->next;
+ if (!nlist) {
+ /* oops - we have no end pressure,
+ * so this means this is a tank without
+ * gas consumption information */
+ break;
+ }
+ pt += nlist->pressure_time;
+ }
+ if (!nlist) {
+ /* just continue without calculating
+ * interpolated values */
+ list = NULL;
+ continue;
+ }
+ magic = (nlist->end - cur_pr[entry->cylinderindex]) / pt; }
+ if (pt != 0.0) {
+ double cur_pt = (entry->sec - (entry-1)->sec) *
+ (1 + entry->depth / 10000.0);
+ INTERPOLATED_PRESSURE(entry) =
+ cur_pr[entry->cylinderindex] + cur_pt * magic;
+ cur_pr[entry->cylinderindex] = INTERPOLATED_PRESSURE(entry);
+ }
+ }
+ }
+}
+
+static int get_cylinder_index(struct dive *dive, struct event *ev)
+{
+ int i;
+
+ /*
+ * Try to find a cylinder that matches the O2 percentage
+ * in the gas change event 'value' field.
+ *
+ * Crazy suunto gas change events. We really should do
+ * this in libdivecomputer or something.
+ */
+ for (i = 0; i < MAX_CYLINDERS; i++) {
+ cylinder_t *cyl = dive->cylinder+i;
+ int o2 = (cyl->gasmix.o2.permille + 5) / 10;
+ if (o2 == ev->value)
+ return i;
+ }
+
+ return 0;
+}
+
+static struct event *get_next_gaschange(struct event *event)
+{
+ while (event) {
+ if (!strcmp(event->name, "gaschange"))
+ return event;
+ event = event->next;
+ }
+ return event;
+}
+
+static int set_cylinder_index(struct plot_info *pi, int i, int cylinderindex, unsigned int end)
+{
+ while (i < pi->nr) {
+ struct plot_data *entry = pi->entry+i;
+ if (entry->sec > end)
+ break;
+ if (entry->cylinderindex != cylinderindex) {
+ entry->cylinderindex = cylinderindex;
+ entry->pressure[0] = 0;
+ }
+ i++;
+ }
+ return i;
+}
+
+static void check_gas_change_events(struct dive *dive, struct plot_info *pi)
+{
+ int i = 0, cylinderindex = 0;
+ struct event *ev = get_next_gaschange(dive->events);
+
+ if (!ev)
+ return;
+
+ do {
+ i = set_cylinder_index(pi, i, cylinderindex, ev->time.seconds);
+ cylinderindex = get_cylinder_index(dive, ev);
+ ev = get_next_gaschange(ev->next);
+ } while (ev);
+ set_cylinder_index(pi, i, cylinderindex, ~0u);
+}
+
/*
* Create a plot-info with smoothing and ranged min/max
*
*/
static struct plot_info *create_plot_info(struct dive *dive)
{
+ int cylinderindex = -1;
int lastdepth, lastindex;
- int i, nr = dive->samples + 4, sec;
+ int i, nr = dive->samples + 4, sec, cyl;
size_t alloc_size = plot_info_size(nr);
struct plot_info *pi;
+ pr_track_t *track_pr[MAX_CYLINDERS] = {NULL, };
+ pr_track_t *pr_track, *current;
+ gboolean missing_pr = FALSE;
+ struct plot_data *entry;
pi = malloc(alloc_size);
if (!pi)
for (i = 0; i < dive->samples; i++) {
int depth;
struct sample *sample = dive->sample+i;
- struct plot_data *entry = pi->entry + i + 2;
+ entry = pi->entry + i + 2;
sec = entry->sec = sample->time.seconds;
- depth = entry->val = sample->depth.mm;
- entry->pressure = sample->cylinderpressure.mbar;
+ depth = entry->depth = sample->depth.mm;
+ entry->cylinderindex = sample->cylinderindex;
+ SENSOR_PRESSURE(entry) = sample->cylinderpressure.mbar;
entry->temperature = sample->temperature.mkelvin;
if (depth || lastdepth)
if (depth > pi->maxdepth)
pi->maxdepth = depth;
}
+
+ check_gas_change_events(dive, pi);
+
+ for (cyl = 0; cyl < MAX_CYLINDERS; cyl++) /* initialize the start pressures */
+ track_pr[cyl] = pr_track_alloc(dive->cylinder[cyl].start.mbar, -1);
+ current = track_pr[dive->sample[0].cylinderindex];
+ for (i = 0; i < dive->samples; i++) {
+ entry = pi->entry + i + 2;
+
+ entry->same_cylinder = entry->cylinderindex == cylinderindex;
+ cylinderindex = entry->cylinderindex;
+
+ /* track the segments per cylinder and their pressure/time integral */
+ if (!entry->same_cylinder) {
+ current->end = SENSOR_PRESSURE(entry-1);
+ current->t_end = (entry-1)->sec;
+ current = pr_track_alloc(SENSOR_PRESSURE(entry), entry->sec);
+ track_pr[cylinderindex] = list_add(track_pr[cylinderindex], current);
+ } else { /* same cylinder */
+ if ((!SENSOR_PRESSURE(entry) && SENSOR_PRESSURE(entry-1)) ||
+ (SENSOR_PRESSURE(entry) && !SENSOR_PRESSURE(entry-1))) {
+ /* transmitter changed its working status */
+ current->end = SENSOR_PRESSURE(entry-1);
+ current->t_end = (entry-1)->sec;
+ current = pr_track_alloc(SENSOR_PRESSURE(entry), entry->sec);
+ track_pr[cylinderindex] =
+ list_add(track_pr[cylinderindex], current);
+ }
+ }
+ /* finally, do the discrete integration to get the SAC rate equivalent */
+ current->pressure_time += (entry->sec - (entry-1)->sec) *
+ (1 + entry->depth / 10000.0);
+ missing_pr |= !SENSOR_PRESSURE(entry);
+ }
+
+ current->t_end = entry->sec;
+ for (cyl = 0; cyl < MAX_CYLINDERS; cyl++) { /* initialize the end pressures */
+ int pr = dive->cylinder[cyl].end.mbar;
+ if (pr && track_pr[cyl]) {
+ pr_track = list_last(track_pr[cyl]);
+ pr_track->end = pr;
+ }
+ }
if (lastdepth)
lastindex = i + 2;
/* Fill in the last two entries with empty values but valid times */
i = dive->samples + 2;
pi->entry[i].sec = sec + 20;
pi->entry[i+1].sec = sec + 40;
-
pi->nr = lastindex+1;
pi->maxtime = pi->entry[lastindex].sec;
- pi->minpressure = dive->cylinder[0].end.mbar;
+ pi->endpressure = pi->minpressure = dive->cylinder[0].end.mbar;
pi->maxpressure = dive->cylinder[0].start.mbar;
pi->meandepth = dive->meandepth.mm;
+ if (missing_pr) {
+ fill_missing_tank_pressures(dive, pi, track_pr);
+ }
+ for (cyl = 0; cyl < MAX_CYLINDERS; cyl++)
+ list_free(track_pr[cyl]);
return analyze_plot_info(pi);
}
-void plot(struct graphics_context *gc, int w, int h, struct dive *dive)
+void plot(struct graphics_context *gc, cairo_rectangle_int_t *drawing_area, struct dive *dive)
{
- double topx, topy;
struct plot_info *pi = create_plot_info(dive);
- topx = w / 20.0;
- topy = h / 20.0;
- cairo_translate(gc->cr, topx, topy);
+ cairo_translate(gc->cr, drawing_area->x, drawing_area->y);
cairo_set_line_width(gc->cr, 2);
cairo_set_line_cap(gc->cr, CAIRO_LINE_CAP_ROUND);
cairo_set_line_join(gc->cr, CAIRO_LINE_JOIN_ROUND);
*
* Snif. What a pity.
*/
- gc->maxx = (w - 2*topx);
- gc->maxy = (h - 2*topy);
+ gc->maxx = (drawing_area->width - 2*drawing_area->x);
+ gc->maxy = (drawing_area->height - 2*drawing_area->y);
/* Temperature profile */
plot_temperature_profile(gc, pi);
/* Depth profile */
plot_depth_profile(gc, pi);
+ plot_events(gc, pi, dive);
/* Text on top of all graphs.. */
plot_temperature_text(gc, pi);
plot_depth_text(gc, pi);
plot_cylinder_pressure_text(gc, pi);
- /* And info box in the lower right corner.. */
+ /* Bounding box last */
gc->leftx = 0; gc->rightx = 1.0;
gc->topy = 0; gc->bottomy = 1.0;
- plot_info(dive, gc);
- /* Bounding box last */
set_source_rgb(gc, 1, 1, 1);
move_to(gc, 0, 0);
line_to(gc, 0, 1);
cairo_close_path(gc->cr);
cairo_stroke(gc->cr);
-}
-
-static gboolean expose_event(GtkWidget *widget, GdkEventExpose *event, gpointer data)
-{
- struct dive *dive = current_dive;
- struct graphics_context gc = { .printer = 0 };
- int w,h;
-
- w = widget->allocation.width;
- h = widget->allocation.height;
-
- gc.cr = gdk_cairo_create(widget->window);
- set_source_rgb(&gc, 0, 0, 0);
- cairo_paint(gc.cr);
-
- if (dive)
- plot(&gc, w, h, dive);
-
- cairo_destroy(gc.cr);
-
- return FALSE;
-}
-
-GtkWidget *dive_profile_widget(void)
-{
- GtkWidget *da;
-
- da = gtk_drawing_area_new();
- gtk_widget_set_size_request(da, 350, 250);
- g_signal_connect(da, "expose_event", G_CALLBACK(expose_event), NULL);
-
- return da;
+ free(pi);
}