return d;
}
+double get_weight_units(unsigned int grams, int *frac, const char **units)
+{
+ int decimals;
+ double value;
+ const char* unit;
+
+ if (output_units.weight == LBS) {
+ value = grams_to_lbs(grams);
+ unit = "lbs";
+ decimals = 0;
+ } else {
+ value = grams / 1000.0;
+ unit = "kg";
+ decimals = 1;
+ }
+ if (frac)
+ *frac = decimals;
+ if (units)
+ *units = unit;
+ return value;
+}
+
struct dive *alloc_dive(void)
{
const int initial_samples = 5;
return NULL;
}
-void finish_sample(struct dive *dive, struct sample *sample)
+void finish_sample(struct dive *dive)
{
dive->samples++;
}
cyl->sample_end.mbar = pressure;
}
-struct dive *fixup_dive(struct dive *dive)
+/*
+ * If the cylinder tank pressures are within half a bar
+ * (about 8 PSI) of the sample pressures, we consider it
+ * to be a rounding error, and throw them away as redundant.
+ */
+static int same_rounded_pressure(pressure_t a, pressure_t b)
+{
+ return abs(a.mbar - b.mbar) <= 500;
+}
+
+static void sanitize_gasmix(struct gasmix *mix)
+{
+ unsigned int o2, he;
+
+ o2 = mix->o2.permille;
+ he = mix->he.permille;
+
+ /* Regular air: leave empty */
+ if (!he) {
+ if (!o2)
+ return;
+ /* 20.9% or 21% O2 is just air */
+ if (o2 >= 209 && o2 <= 210) {
+ mix->o2.permille = 0;
+ return;
+ }
+ }
+
+ /* Sane mix? */
+ if (o2 <= 1000 && he <= 1000 && o2+he <= 1000)
+ return;
+ fprintf(stderr, "Odd gasmix: %d O2 %d He\n", o2, he);
+ memset(mix, 0, sizeof(*mix));
+}
+
+/*
+ * See if the size/workingpressure looks like some standard cylinder
+ * size, eg "AL80".
+ */
+static void match_standard_cylinder(cylinder_type_t *type)
+{
+ double cuft;
+ int psi, len;
+ const char *fmt;
+ char buffer[20], *p;
+
+ /* Do we already have a cylinder description? */
+ if (type->description)
+ return;
+
+ cuft = ml_to_cuft(type->size.mliter);
+ cuft *= to_ATM(type->workingpressure);
+ psi = to_PSI(type->workingpressure);
+
+ switch (psi) {
+ case 2300 ... 2500: /* 2400 psi: LP tank */
+ fmt = "LP%d";
+ break;
+ case 2600 ... 2700: /* 2640 psi: LP+10% */
+ fmt = "LP%d";
+ break;
+ case 2900 ... 3100: /* 3000 psi: ALx tank */
+ fmt = "AL%d";
+ break;
+ case 3400 ... 3500: /* 3442 psi: HP tank */
+ fmt = "HP%d";
+ break;
+ case 3700 ... 3850: /* HP+10% */
+ fmt = "HP%d+";
+ break;
+ default:
+ return;
+ }
+ len = snprintf(buffer, sizeof(buffer), fmt, (int) (cuft+0.5));
+ p = malloc(len+1);
+ if (!p)
+ return;
+ memcpy(p, buffer, len+1);
+ type->description = p;
+}
+
+
+/*
+ * There are two ways to give cylinder size information:
+ * - total amount of gas in cuft (depends on working pressure and physical size)
+ * - physical size
+ *
+ * where "physical size" is the one that actually matters and is sane.
+ *
+ * We internally use physical size only. But we save the workingpressure
+ * so that we can do the conversion if required.
+ */
+static void sanitize_cylinder_type(cylinder_type_t *type)
+{
+ double volume_of_air, atm, volume;
+
+ /* If we have no working pressure, it had *better* be just a physical size! */
+ if (!type->workingpressure.mbar)
+ return;
+
+ /* No size either? Nothing to go on */
+ if (!type->size.mliter)
+ return;
+
+ if (input_units.volume == CUFT) {
+ /* confusing - we don't really start from ml but millicuft !*/
+ volume_of_air = cuft_to_l(type->size.mliter);
+ atm = to_ATM(type->workingpressure); /* working pressure in atm */
+ volume = volume_of_air / atm; /* milliliters at 1 atm: "true size" */
+ type->size.mliter = volume + 0.5;
+ }
+
+ /* Ok, we have both size and pressure: try to match a description */
+ match_standard_cylinder(type);
+}
+
+static void sanitize_cylinder_info(struct dive *dive)
{
int i;
+
+ for (i = 0; i < MAX_CYLINDERS; i++) {
+ sanitize_gasmix(&dive->cylinder[i].gasmix);
+ sanitize_cylinder_type(&dive->cylinder[i].type);
+ }
+}
+
+struct dive *fixup_dive(struct dive *dive)
+{
+ int i,j;
double depthtime = 0;
int lasttime = 0;
+ int lastindex = -1;
int start = -1, end = -1;
int maxdepth = 0, mintemp = 0;
int lastdepth = 0;
- int lasttemp = 0;
+ int lasttemp = 0, lastpressure = 0;
+ int pressure_delta[MAX_CYLINDERS] = {INT_MAX, };
+ sanitize_cylinder_info(dive);
for (i = 0; i < dive->samples; i++) {
struct sample *sample = dive->sample + i;
int time = sample->time.seconds;
int depth = sample->depth.mm;
int temp = sample->temperature.mkelvin;
+ int pressure = sample->cylinderpressure.mbar;
+ int index = sample->cylinderindex;
+
+ if (index == lastindex) {
+ /* Remove duplicate redundant pressure information */
+ if (pressure == lastpressure)
+ sample->cylinderpressure.mbar = 0;
+ /* check for simply linear data in the samples
+ +INT_MAX means uninitialized, -INT_MAX means not linear */
+ if (pressure_delta[index] != -INT_MAX && lastpressure) {
+ if (pressure_delta[index] == INT_MAX) {
+ pressure_delta[index] = abs(pressure - lastpressure);
+ } else {
+ int cur_delta = abs(pressure - lastpressure);
+ if (cur_delta && abs(cur_delta - pressure_delta[index]) > 150) {
+ /* ok the samples aren't just a linearisation
+ * between start and end */
+ pressure_delta[index] = -INT_MAX;
+ }
+ }
+ }
+ }
+ lastindex = index;
+ lastpressure = pressure;
if (lastdepth)
end = time;
lastdepth = depth;
lasttime = time;
}
+ /* if all the samples for a cylinder have pressure data that
+ * is basically equidistant throw out the sample cylinder pressure
+ * information but make sure we still have a valid start and end
+ * pressure
+ * this happens when DivingLog decides to linearalize the
+ * pressure between beginning and end and for strange reasons
+ * decides to put that in the sample data as if it came from
+ * the dive computer; we don't want that (we'll visualize with
+ * constant SAC rate instead)
+ * WARNING WARNING - I have only seen this in single tank dives
+ * --- maybe I should try to create a multi tank dive and see what
+ * --- divinglog does there - but the code right now is only tested
+ * --- for the single tank case */
+ for (j = 0; j < MAX_CYLINDERS; j++) {
+ if (abs(pressure_delta[j]) != INT_MAX) {
+ cylinder_t *cyl = dive->cylinder + j;
+ for (i = 0; i < dive->samples; i++)
+ if (dive->sample[i].cylinderindex == j)
+ dive->sample[i].cylinderpressure.mbar = 0;
+ if (! cyl->start.mbar)
+ cyl->start.mbar = cyl->sample_start.mbar;
+ if (! cyl->end.mbar)
+ cyl->end.mbar = cyl->sample_end.mbar;
+ cyl->sample_start.mbar = 0;
+ cyl->sample_end.mbar = 0;
+ }
+ }
if (end < 0)
return dive;
add_people(dive->buddy);
add_people(dive->divemaster);
add_location(dive->location);
+ add_suit(dive->suit);
for (i = 0; i < MAX_CYLINDERS; i++) {
cylinder_t *cyl = dive->cylinder + i;
add_cylinder_description(&cyl->type);
- if (cyl->sample_start.mbar == cyl->start.mbar)
+ if (same_rounded_pressure(cyl->sample_start, cyl->start))
cyl->start.mbar = 0;
- if (cyl->sample_end.mbar == cyl->end.mbar)
+ if (same_rounded_pressure(cyl->sample_end, cyl->end))
cyl->end.mbar = 0;
}
+ for (i = 0; i < MAX_WEIGHTSYSTEMS; i++) {
+ weightsystem_t *ws = dive->weightsystem + i;
+ add_weightsystem_description(ws);
+ }
return dive;
}
return NULL;
*p = *sample;
p->time.seconds = time;
- finish_sample(dive, p);
+ finish_sample(dive);
return dive;
}
MERGE_TXT(res, a, b, notes);
MERGE_TXT(res, a, b, buddy);
MERGE_TXT(res, a, b, divemaster);
+ MERGE_MAX(res, a, b, rating);
+ MERGE_TXT(res, a, b, suit);
MERGE_MAX(res, a, b, number);
MERGE_MAX(res, a, b, maxdepth.mm);
res->meandepth.mm = 0;