+ while (i < pi->nr) {
+ struct plot_data *entry = pi->entry+i;
+ if (entry->sec > end)
+ break;
+ if (entry->cylinderindex != cylinderindex) {
+ entry->cylinderindex = cylinderindex;
+ entry->pressure[0] = 0;
+ }
+ i++;
+ }
+ return i;
+}
+
+static void check_gas_change_events(struct dive *dive, struct plot_info *pi)
+{
+ int i = 0, cylinderindex = 0;
+ struct event *ev = get_next_gaschange(dive->events);
+
+ if (!ev)
+ return;
+
+ do {
+ i = set_cylinder_index(pi, i, cylinderindex, ev->time.seconds);
+ cylinderindex = get_cylinder_index(dive, ev);
+ ev = get_next_gaschange(ev->next);
+ } while (ev);
+ set_cylinder_index(pi, i, cylinderindex, ~0u);
+}
+
+/* for computers that track gas changes through events */
+static int count_gas_change_events(struct dive *dive)
+{
+ int count = 0;
+ struct event *ev = get_next_gaschange(dive->events);
+
+ while (ev) {
+ count++;
+ ev = get_next_gaschange(ev->next);
+ }
+ return count;
+}
+
+/*
+ * Create a plot-info with smoothing and ranged min/max
+ *
+ * This also makes sure that we have extra empty events on both
+ * sides, so that you can do end-points without having to worry
+ * about it.
+ */
+static struct plot_info *create_plot_info(struct dive *dive, int nr_samples, struct sample *dive_sample)
+{
+ int cylinderindex = -1;
+ int lastdepth, lastindex;
+ int i, pi_idx, nr, sec, cyl;
+ size_t alloc_size;
+ struct plot_info *pi;
+ pr_track_t *track_pr[MAX_CYLINDERS] = {NULL, };
+ pr_track_t *pr_track, *current;
+ gboolean missing_pr = FALSE;
+ struct plot_data *entry = NULL;
+ struct event *ev;
+
+ /* we want to potentially add synthetic plot_info elements for the gas changes */
+ nr = nr_samples + 4 + 2 * count_gas_change_events(dive);
+ alloc_size = plot_info_size(nr);
+ pi = malloc(alloc_size);
+ if (!pi)
+ return pi;
+ memset(pi, 0, alloc_size);
+ pi->nr = nr;
+ pi_idx = 2; /* the two extra events at the start */
+ /* check for gas changes before the samples start */
+ ev = get_next_gaschange(dive->events);
+ while (ev && ev->time.seconds < dive_sample->time.seconds) {
+ entry = pi->entry + pi_idx;
+ entry->sec = ev->time.seconds;
+ entry->depth = 0; /* is that always correct ? */
+ pi_idx++;
+ ev = get_next_gaschange(ev->next);
+ }
+ if (ev && ev->time.seconds == dive_sample->time.seconds) {
+ /* we already have a sample at the time of the event */
+ ev = get_next_gaschange(ev->next);
+ }
+ sec = 0;
+ lastindex = 0;
+ lastdepth = -1;
+ for (i = 0; i < nr_samples; i++) {
+ int depth;
+ int delay = 0;
+ struct sample *sample = dive_sample+i;
+
+ entry = pi->entry + i + pi_idx;
+ while (ev && ev->time.seconds < sample->time.seconds) {
+ /* insert two fake plot info structures for the end of
+ * the old tank and the start of the new tank */
+ if (ev->time.seconds == sample->time.seconds - 1) {
+ entry->sec = ev->time.seconds - 1;
+ (entry+1)->sec = ev->time.seconds;
+ } else {
+ entry->sec = ev->time.seconds;
+ (entry+1)->sec = ev->time.seconds + 1;
+ }
+ /* we need a fake depth - let's interpolate */
+ if (i) {
+ entry->depth = sample->depth.mm -
+ (sample->depth.mm - (sample-1)->depth.mm) / 2;
+ } else
+ entry->depth = sample->depth.mm;
+ (entry+1)->depth = entry->depth;
+ pi_idx += 2;
+ entry = pi->entry + i + pi_idx;
+ ev = get_next_gaschange(ev->next);
+ }
+ if (ev && ev->time.seconds == sample->time.seconds) {
+ /* we already have a sample at the time of the event
+ * just add a new one for the old tank and delay the
+ * real even by one second (to keep time monotonous) */
+ entry->sec = ev->time.seconds;
+ entry->depth = sample->depth.mm;
+ pi_idx++;
+ entry = pi->entry + i + pi_idx;
+ ev = get_next_gaschange(ev->next);
+ delay = 1;
+ }
+ sec = entry->sec = sample->time.seconds + delay;
+ depth = entry->depth = sample->depth.mm;
+ entry->cylinderindex = sample->cylinderindex;
+ SENSOR_PRESSURE(entry) = sample->cylinderpressure.mbar;
+ entry->temperature = sample->temperature.mkelvin;
+
+ if (depth || lastdepth)
+ lastindex = i + pi_idx;
+
+ lastdepth = depth;
+ if (depth > pi->maxdepth)
+ pi->maxdepth = depth;
+ }
+ entry = pi->entry + i + pi_idx;
+ /* are there still unprocessed gas changes? that would be very strange */
+ while (ev) {
+ entry->sec = ev->time.seconds;
+ entry->depth = 0; /* why are there gas changes after the dive is over? */
+ pi_idx++;
+ entry = pi->entry + i + pi_idx;
+ ev = get_next_gaschange(ev->next);
+ }
+ nr = nr_samples + pi_idx - 2;
+ check_gas_change_events(dive, pi);
+
+ for (cyl = 0; cyl < MAX_CYLINDERS; cyl++) /* initialize the start pressures */
+ track_pr[cyl] = pr_track_alloc(dive->cylinder[cyl].start.mbar, -1);
+ current = track_pr[pi->entry[2].cylinderindex];
+ for (i = 0; i < nr + 1; i++) {
+ entry = pi->entry + i + 1;
+
+ entry->same_cylinder = entry->cylinderindex == cylinderindex;
+ cylinderindex = entry->cylinderindex;
+
+ /* track the segments per cylinder and their pressure/time integral */
+ if (!entry->same_cylinder) {
+ current->end = SENSOR_PRESSURE(entry-1);
+ current->t_end = (entry-1)->sec;
+ current = pr_track_alloc(SENSOR_PRESSURE(entry), entry->sec);
+ track_pr[cylinderindex] = list_add(track_pr[cylinderindex], current);
+ } else { /* same cylinder */
+ if ((!SENSOR_PRESSURE(entry) && SENSOR_PRESSURE(entry-1)) ||
+ (SENSOR_PRESSURE(entry) && !SENSOR_PRESSURE(entry-1))) {
+ /* transmitter changed its working status */
+ current->end = SENSOR_PRESSURE(entry-1);
+ current->t_end = (entry-1)->sec;
+ current = pr_track_alloc(SENSOR_PRESSURE(entry), entry->sec);
+ track_pr[cylinderindex] =
+ list_add(track_pr[cylinderindex], current);
+ }
+ }
+ /* finally, do the discrete integration to get the SAC rate equivalent */
+ current->pressure_time += (entry->sec - (entry-1)->sec) *
+ (1 + (entry->depth + (entry-1)->depth) / 20000.0);
+ missing_pr |= !SENSOR_PRESSURE(entry);
+ }
+
+ if (entry)
+ current->t_end = entry->sec;
+
+ for (cyl = 0; cyl < MAX_CYLINDERS; cyl++) { /* initialize the end pressures */
+ int pr = dive->cylinder[cyl].end.mbar;
+ if (pr && track_pr[cyl]) {
+ pr_track = list_last(track_pr[cyl]);
+ pr_track->end = pr;
+ }
+ }
+ /* Fill in the last two entries with empty values but valid times
+ * without creating a false cylinder change event */
+ i = nr + 2;
+ pi->entry[i].sec = sec + 20;
+ pi->entry[i].same_cylinder = 1;
+ pi->entry[i].cylinderindex = pi->entry[i-1].cylinderindex;
+ INTERPOLATED_PRESSURE(pi->entry + i) = GET_PRESSURE(pi->entry + i - 1);
+ pi->entry[i+1].sec = sec + 40;
+ pi->entry[i+1].same_cylinder = 1;
+ pi->entry[i+1].cylinderindex = pi->entry[i-1].cylinderindex;
+ INTERPOLATED_PRESSURE(pi->entry + i + 1) = GET_PRESSURE(pi->entry + i - 1);
+ /* the number of actual entries - some computers have lots of
+ * depth 0 samples at the end of a dive, we want to make sure
+ * we have exactly one of them at the end */
+ pi->nr = lastindex+1;
+ while (pi->nr <= i+2 && pi->entry[pi->nr-1].depth > 0)
+ pi->nr++;
+ pi->maxtime = pi->entry[lastindex].sec;
+
+ /* Analyze_plot_info() will do the sample max pressures,
+ * this handles the manual pressures
+ */
+ pi->maxpressure = 0;
+ for (cyl = 0; cyl < MAX_CYLINDERS; cyl++) {
+ unsigned int mbar = dive->cylinder[cyl].start.mbar;
+ if (mbar > pi->maxpressure)
+ pi->maxpressure = mbar;
+ }
+
+ pi->meandepth = dive->meandepth.mm;
+
+ if (missing_pr) {
+ fill_missing_tank_pressures(dive, pi, track_pr);
+ }
+ for (cyl = 0; cyl < MAX_CYLINDERS; cyl++)
+ list_free(track_pr[cyl]);
+ if (0) /* awesome for debugging - not useful otherwise */
+ dump_pi(pi);
+ return analyze_plot_info(pi);
+}
+
+void plot(struct graphics_context *gc, cairo_rectangle_int_t *drawing_area, struct dive *dive)
+{
+ struct plot_info *pi;
+ static struct sample fake[4];
+ struct sample *sample = dive->sample;
+ int nr = dive->samples;
+
+ if (!nr) {
+ int duration = dive->duration.seconds;
+ int maxdepth = dive->maxdepth.mm;
+ sample = fake;
+ fake[1].time.seconds = duration * 0.05;
+ fake[1].depth.mm = maxdepth;
+ fake[2].time.seconds = duration * 0.95;
+ fake[2].depth.mm = maxdepth;
+ fake[3].time.seconds = duration * 1.00;
+ nr = 4;
+ }
+
+ pi = create_plot_info(dive, nr, sample);
+
+ cairo_translate(gc->cr, drawing_area->x, drawing_area->y);
+ cairo_set_line_width(gc->cr, 2);
+ cairo_set_line_cap(gc->cr, CAIRO_LINE_CAP_ROUND);
+ cairo_set_line_join(gc->cr, CAIRO_LINE_JOIN_ROUND);
+
+ /*
+ * We can use "cairo_translate()" because that doesn't
+ * scale line width etc. But the actual scaling we need
+ * do set up ourselves..
+ *
+ * Snif. What a pity.
+ */
+ gc->maxx = (drawing_area->width - 2*drawing_area->x);
+ gc->maxy = (drawing_area->height - 2*drawing_area->y);
+
+ /* Temperature profile */
+ plot_temperature_profile(gc, pi);
+
+ /* Depth profile */
+ plot_depth_profile(gc, pi);
+ plot_events(gc, pi, dive);
+
+ /* Cylinder pressure plot */
+ plot_cylinder_pressure(gc, pi, dive);
+
+ /* Text on top of all graphs.. */
+ plot_temperature_text(gc, pi);
+ plot_depth_text(gc, pi);
+ plot_cylinder_pressure_text(gc, pi);
+
+ /* Bounding box last */
+ gc->leftx = 0; gc->rightx = 1.0;
+ gc->topy = 0; gc->bottomy = 1.0;