1 # Makefile.in generated by automake 1.16.3 from Makefile.am.
4 # Copyright (C) 1994-2020 Free Software Foundation, Inc.
6 # This Makefile.in is free software; the Free Software Foundation
7 # gives unlimited permission to copy and/or distribute it,
8 # with or without modifications, as long as this notice is preserved.
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
19 if test -z '$(MAKELEVEL)'; then \
21 elif test -n '$(MAKE_HOST)'; then \
23 elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
29 am__make_running_with_option = \
30 case $${target_option-} in \
32 *) echo "am__make_running_with_option: internal error: invalid" \
33 "target option '$${target_option-}' specified" >&2; \
37 sane_makeflags=$$MAKEFLAGS; \
38 if $(am__is_gnu_make); then \
39 sane_makeflags=$$MFLAGS; \
44 sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
45 | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
51 flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
53 for flg in $$sane_makeflags; do \
54 test $$skip_next = yes && { skip_next=no; continue; }; \
57 -*I) strip_trailopt 'I'; skip_next=yes;; \
58 -*I?*) strip_trailopt 'I';; \
59 -*O) strip_trailopt 'O'; skip_next=yes;; \
60 -*O?*) strip_trailopt 'O';; \
61 -*l) strip_trailopt 'l'; skip_next=yes;; \
62 -*l?*) strip_trailopt 'l';; \
63 -[dEDm]) skip_next=yes;; \
64 -[JT]) skip_next=yes;; \
67 *$$target_option*) has_opt=yes; break;; \
71 am__make_dryrun = (target_option=n; $(am__make_running_with_option))
72 am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
73 pkgdatadir = $(datadir)/@PACKAGE@
74 pkgincludedir = $(includedir)/@PACKAGE@
75 pkglibdir = $(libdir)/@PACKAGE@
76 pkglibexecdir = $(libexecdir)/@PACKAGE@
77 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
78 install_sh_DATA = $(install_sh) -c -m 644
79 install_sh_PROGRAM = $(install_sh) -c
80 install_sh_SCRIPT = $(install_sh) -c
81 INSTALL_HEADER = $(INSTALL_DATA)
82 transform = $(program_transform_name)
89 build_triplet = @build@
92 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
93 am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
94 $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
95 $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
96 $(top_srcdir)/configure.ac
97 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
99 DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
100 $(am__configure_deps) $(am__DIST_COMMON)
101 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
102 configure.lineno config.status.lineno
103 mkinstalldirs = $(install_sh) -d
104 CONFIG_HEADER = config.h
105 CONFIG_CLEAN_FILES = libogg.spec ogg.pc ogg-uninstalled.pc
106 CONFIG_CLEAN_VPATH_FILES =
107 AM_V_P = $(am__v_P_@AM_V@)
108 am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
111 AM_V_GEN = $(am__v_GEN_@AM_V@)
112 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
113 am__v_GEN_0 = @echo " GEN " $@;
115 AM_V_at = $(am__v_at_@AM_V@)
116 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
121 RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
122 ctags-recursive dvi-recursive html-recursive info-recursive \
123 install-data-recursive install-dvi-recursive \
124 install-exec-recursive install-html-recursive \
125 install-info-recursive install-pdf-recursive \
126 install-ps-recursive install-recursive installcheck-recursive \
127 installdirs-recursive pdf-recursive ps-recursive \
128 tags-recursive uninstall-recursive
129 am__can_run_installinfo = \
130 case $$AM_UPDATE_INFO_DIR in \
132 *) (install-info --version) >/dev/null 2>&1;; \
134 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
135 am__vpath_adj = case $$p in \
136 $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
139 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
141 am__nobase_strip_setup = \
142 srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
144 for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
145 am__nobase_list = $(am__nobase_strip_setup); \
146 for p in $$list; do echo "$$p $$p"; done | \
147 sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
148 $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
149 if (++n[$$2] == $(am__install_max)) \
150 { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
151 END { for (dir in files) print dir, files[dir] }'
153 sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
154 sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
155 am__uninstall_files_from_dir = { \
157 || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
158 || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
159 $(am__cd) "$$dir" && rm -f $$files; }; \
161 am__installdirs = "$(DESTDIR)$(m4datadir)" "$(DESTDIR)$(pkgconfigdir)"
162 DATA = $(m4data_DATA) $(pkgconfig_DATA)
163 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
164 distclean-recursive maintainer-clean-recursive
165 am__recursive_targets = \
166 $(RECURSIVE_TARGETS) \
167 $(RECURSIVE_CLEAN_TARGETS) \
168 $(am__extra_recursive_targets)
169 AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
170 cscope distdir distdir-am dist dist-all distcheck
171 am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) \
173 # Read a list of newline-separated strings from the standard input,
174 # and print each of them once, without duplicates. Input order is
176 am__uniquify_input = $(AWK) '\
177 BEGIN { nonempty = 0; } \
178 { items[$$0] = 1; nonempty = 1; } \
179 END { if (nonempty) { for (i in items) print i; }; } \
181 # Make sure the list of sources is unique. This is necessary because,
182 # e.g., the same source file might be shared among _SOURCES variables
183 # for different programs/libraries.
184 am__define_uniq_tagged_files = \
185 list='$(am__tagged_files)'; \
186 unique=`for i in $$list; do \
187 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
188 done | $(am__uniquify_input)`
192 DIST_SUBDIRS = $(SUBDIRS)
193 am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in \
194 $(srcdir)/libogg.spec.in $(srcdir)/ogg-uninstalled.pc.in \
195 $(srcdir)/ogg.pc.in AUTHORS COPYING compile config.guess \
196 config.sub depcomp install-sh ltmain.sh missing
197 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
198 distdir = $(PACKAGE)-$(VERSION)
199 top_distdir = $(distdir)
200 am__remove_distdir = \
201 if test -d "$(distdir)"; then \
202 find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
203 && rm -rf "$(distdir)" \
204 || { sleep 5 && rm -rf "$(distdir)"; }; \
206 am__post_remove_distdir = $(am__remove_distdir)
209 sed_first='s,^\([^/]*\)/.*$$,\1,'; \
210 sed_rest='s,^[^/]*/*,,'; \
211 sed_last='s,^.*/\([^/]*\)$$,\1,'; \
212 sed_butlast='s,/*[^/]*$$,,'; \
213 while test -n "$$dir1"; do \
214 first=`echo "$$dir1" | sed -e "$$sed_first"`; \
215 if test "$$first" != "."; then \
216 if test "$$first" = ".."; then \
217 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
218 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
220 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
221 if test "$$first2" = "$$first"; then \
222 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
226 dir0="$$dir0"/"$$first"; \
229 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
232 DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.xz $(distdir).zip
234 DIST_TARGETS = dist-xz dist-gzip dist-zip
235 # Exists only to be overridden by the user if desired.
236 AM_DISTCHECK_DVI_TARGET = dvi
237 distuninstallcheck_listfiles = find . -type f -print
238 am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
239 | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
240 distcleancheck_listfiles = find . -type f -print
243 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
245 AUTOCONF = @AUTOCONF@
246 AUTOHEADER = @AUTOHEADER@
247 AUTOMAKE = @AUTOMAKE@
250 CCDEPMODE = @CCDEPMODE@
253 CPPFLAGS = @CPPFLAGS@
254 CYGPATH_W = @CYGPATH_W@
259 DSYMUTIL = @DSYMUTIL@
268 INCLUDE_INTTYPES_H = @INCLUDE_INTTYPES_H@
269 INCLUDE_STDINT_H = @INCLUDE_STDINT_H@
270 INCLUDE_SYS_TYPES_H = @INCLUDE_SYS_TYPES_H@
272 INSTALL_DATA = @INSTALL_DATA@
273 INSTALL_PROGRAM = @INSTALL_PROGRAM@
274 INSTALL_SCRIPT = @INSTALL_SCRIPT@
275 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
281 LIBTOOL_DEPS = @LIBTOOL_DEPS@
283 LIB_CURRENT = @LIB_CURRENT@
284 LIB_REVISION = @LIB_REVISION@
287 LTLIBOBJS = @LTLIBOBJS@
288 LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
290 MAKEINFO = @MAKEINFO@
291 MANIFEST_TOOL = @MANIFEST_TOOL@
301 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
302 PACKAGE_NAME = @PACKAGE_NAME@
303 PACKAGE_STRING = @PACKAGE_STRING@
304 PACKAGE_TARNAME = @PACKAGE_TARNAME@
305 PACKAGE_URL = @PACKAGE_URL@
306 PACKAGE_VERSION = @PACKAGE_VERSION@
307 PATH_SEPARATOR = @PATH_SEPARATOR@
311 SET_MAKE = @SET_MAKE@
321 abs_builddir = @abs_builddir@
322 abs_srcdir = @abs_srcdir@
323 abs_top_builddir = @abs_top_builddir@
324 abs_top_srcdir = @abs_top_srcdir@
325 ac_ct_AR = @ac_ct_AR@
326 ac_ct_CC = @ac_ct_CC@
327 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
328 am__include = @am__include@
329 am__leading_dot = @am__leading_dot@
330 am__quote = @am__quote@
332 am__untar = @am__untar@
335 build_alias = @build_alias@
336 build_cpu = @build_cpu@
337 build_os = @build_os@
338 build_vendor = @build_vendor@
339 builddir = @builddir@
341 datarootdir = @datarootdir@
344 exec_prefix = @exec_prefix@
346 host_alias = @host_alias@
347 host_cpu = @host_cpu@
349 host_vendor = @host_vendor@
351 includedir = @includedir@
353 install_sh = @install_sh@
355 libexecdir = @libexecdir@
356 localedir = @localedir@
357 localstatedir = @localstatedir@
360 oldincludedir = @oldincludedir@
363 program_transform_name = @program_transform_name@
365 runstatedir = @runstatedir@
367 sharedstatedir = @sharedstatedir@
369 sysconfdir = @sysconfdir@
370 target_alias = @target_alias@
371 top_build_prefix = @top_build_prefix@
372 top_builddir = @top_builddir@
373 top_srcdir = @top_srcdir@
375 #AUTOMAKE_OPTIONS = foreign 1.6 dist-zip
376 AUTOMAKE_OPTIONS = foreign 1.11 dist-zip dist-xz
377 ACLOCAL_AMFLAGS = -I m4
378 SUBDIRS = src include doc
379 m4datadir = $(datadir)/aclocal
381 pkgconfigdir = $(libdir)/pkgconfig
382 pkgconfig_DATA = ogg.pc
383 EXTRA_DIST = README.md AUTHORS CHANGES COPYING \
384 libogg.spec libogg.spec.in \
385 ogg.m4 ogg.pc.in ogg-uninstalled.pc.in \
386 win32 CMakeLists.txt cmake
389 # Verify cmake works with the dist tarball.
390 cmake_builddir = _build.cmake
392 $(MAKE) $(AM_MAKEFLAGS) all-recursive
395 am--refresh: Makefile
397 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
399 case '$(am__configure_deps)' in \
401 echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
402 $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
407 echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
408 $(am__cd) $(top_srcdir) && \
409 $(AUTOMAKE) --foreign Makefile
410 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
413 echo ' $(SHELL) ./config.status'; \
414 $(SHELL) ./config.status;; \
416 echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \
417 cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \
420 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
421 $(SHELL) ./config.status --recheck
423 $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
424 $(am__cd) $(srcdir) && $(AUTOCONF)
425 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
426 $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
427 $(am__aclocal_m4_deps):
430 @test -f $@ || rm -f stamp-h1
431 @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
433 stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
435 cd $(top_builddir) && $(SHELL) ./config.status config.h
436 $(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
437 ($(am__cd) $(top_srcdir) && $(AUTOHEADER))
442 -rm -f config.h stamp-h1
443 libogg.spec: $(top_builddir)/config.status $(srcdir)/libogg.spec.in
444 cd $(top_builddir) && $(SHELL) ./config.status $@
445 ogg.pc: $(top_builddir)/config.status $(srcdir)/ogg.pc.in
446 cd $(top_builddir) && $(SHELL) ./config.status $@
447 ogg-uninstalled.pc: $(top_builddir)/config.status $(srcdir)/ogg-uninstalled.pc.in
448 cd $(top_builddir) && $(SHELL) ./config.status $@
457 -rm -f libtool config.lt
458 install-m4dataDATA: $(m4data_DATA)
460 @list='$(m4data_DATA)'; test -n "$(m4datadir)" || list=; \
461 if test -n "$$list"; then \
462 echo " $(MKDIR_P) '$(DESTDIR)$(m4datadir)'"; \
463 $(MKDIR_P) "$(DESTDIR)$(m4datadir)" || exit 1; \
465 for p in $$list; do \
466 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
468 done | $(am__base_list) | \
469 while read files; do \
470 echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(m4datadir)'"; \
471 $(INSTALL_DATA) $$files "$(DESTDIR)$(m4datadir)" || exit $$?; \
474 uninstall-m4dataDATA:
476 @list='$(m4data_DATA)'; test -n "$(m4datadir)" || list=; \
477 files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
478 dir='$(DESTDIR)$(m4datadir)'; $(am__uninstall_files_from_dir)
479 install-pkgconfigDATA: $(pkgconfig_DATA)
481 @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
482 if test -n "$$list"; then \
483 echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
484 $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
486 for p in $$list; do \
487 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
489 done | $(am__base_list) | \
490 while read files; do \
491 echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
492 $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
495 uninstall-pkgconfigDATA:
497 @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
498 files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
499 dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)
501 # This directory's subdirectories are mostly independent; you can cd
502 # into them and run 'make' without going through this Makefile.
503 # To change the values of 'make' variables: instead of editing Makefiles,
504 # (1) if the variable is set in 'config.status', edit 'config.status'
505 # (which will cause the Makefiles to be regenerated when you run 'make');
506 # (2) otherwise, pass the desired values on the 'make' command line.
507 $(am__recursive_targets):
509 if $(am__make_keepgoing); then \
510 failcom='fail=yes'; \
515 target=`echo $@ | sed s/-recursive//`; \
517 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
518 *) list='$(SUBDIRS)' ;; \
520 for subdir in $$list; do \
521 echo "Making $$target in $$subdir"; \
522 if test "$$subdir" = "."; then \
524 local_target="$$target-am"; \
526 local_target="$$target"; \
528 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
531 if test "$$dot_seen" = "no"; then \
532 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
535 ID: $(am__tagged_files)
536 $(am__define_uniq_tagged_files); mkid -fID $$unique
540 tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
543 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
544 include_option=--etags-include; \
547 include_option=--include; \
550 list='$(SUBDIRS)'; for subdir in $$list; do \
551 if test "$$subdir" = .; then :; else \
552 test ! -f $$subdir/TAGS || \
553 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
556 $(am__define_uniq_tagged_files); \
558 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
559 test -n "$$unique" || unique=$$empty_fix; \
560 if test $$# -gt 0; then \
561 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
564 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
568 ctags: ctags-recursive
571 ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
572 $(am__define_uniq_tagged_files); \
573 test -z "$(CTAGS_ARGS)$$unique" \
574 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
578 here=`$(am__cd) $(top_builddir) && pwd` \
579 && $(am__cd) $(top_srcdir) \
580 && gtags -i $(GTAGS_ARGS) "$$here"
582 test ! -s cscope.files \
583 || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
586 cscope.files: clean-cscope cscopelist
587 cscopelist: cscopelist-recursive
589 cscopelist-am: $(am__tagged_files)
590 list='$(am__tagged_files)'; \
591 case "$(srcdir)" in \
592 [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
593 *) sdir=$(subdir)/$(srcdir) ;; \
595 for i in $$list; do \
596 if test -f "$$i"; then \
597 echo "$(subdir)/$$i"; \
601 done >> $(top_builddir)/cscope.files
604 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
605 -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
607 distdir: $(BUILT_SOURCES)
608 $(MAKE) $(AM_MAKEFLAGS) distdir-am
610 distdir-am: $(DISTFILES)
611 $(am__remove_distdir)
612 test -d "$(distdir)" || mkdir "$(distdir)"
613 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
614 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
615 list='$(DISTFILES)'; \
616 dist_files=`for file in $$list; do echo $$file; done | \
617 sed -e "s|^$$srcdirstrip/||;t" \
618 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
619 case $$dist_files in \
620 */*) $(MKDIR_P) `echo "$$dist_files" | \
621 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
624 for file in $$dist_files; do \
625 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
626 if test -d $$d/$$file; then \
627 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
628 if test -d "$(distdir)/$$file"; then \
629 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
631 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
632 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
633 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
635 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
637 test -f "$(distdir)/$$file" \
638 || cp -p $$d/$$file "$(distdir)/$$file" \
642 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
643 if test "$$subdir" = .; then :; else \
645 || test -d "$(distdir)/$$subdir" \
646 || $(MKDIR_P) "$(distdir)/$$subdir" \
648 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
650 new_distdir=$$reldir; \
651 dir1=$$subdir; dir2="$(top_distdir)"; \
653 new_top_distdir=$$reldir; \
654 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
655 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
656 ($(am__cd) $$subdir && \
657 $(MAKE) $(AM_MAKEFLAGS) \
658 top_distdir="$$new_top_distdir" \
659 distdir="$$new_distdir" \
660 am__remove_distdir=: \
661 am__skip_length_check=: \
662 am__skip_mode_fix=: \
667 $(MAKE) $(AM_MAKEFLAGS) \
668 top_distdir="$(top_distdir)" distdir="$(distdir)" \
670 -test -n "$(am__skip_mode_fix)" \
671 || find "$(distdir)" -type d ! -perm -755 \
672 -exec chmod u+rwx,go+rx {} \; -o \
673 ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
674 ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
675 ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
676 || chmod -R a+r "$(distdir)"
678 tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
679 $(am__post_remove_distdir)
682 tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
683 $(am__post_remove_distdir)
686 tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
687 $(am__post_remove_distdir)
689 tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
690 $(am__post_remove_distdir)
693 tardir=$(distdir) && $(am__tar) | zstd -c $${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst
694 $(am__post_remove_distdir)
697 @echo WARNING: "Support for distribution archives compressed with" \
698 "legacy program 'compress' is deprecated." >&2
699 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
700 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
701 $(am__post_remove_distdir)
704 @echo WARNING: "Support for shar distribution archives is" \
706 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
707 shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
708 $(am__post_remove_distdir)
710 -rm -f $(distdir).zip
711 zip -rq $(distdir).zip $(distdir)
712 $(am__post_remove_distdir)
715 $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
716 $(am__post_remove_distdir)
718 # This target untars the dist file and tries a VPATH configuration. Then
719 # it guarantees that the distribution is self-contained by making another
722 case '$(DIST_ARCHIVES)' in \
724 eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
726 bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
728 lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
730 xz -dc $(distdir).tar.xz | $(am__untar) ;;\
732 uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
734 eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
736 unzip $(distdir).zip ;;\
738 zstd -dc $(distdir).tar.zst | $(am__untar) ;;\
740 chmod -R a-w $(distdir)
742 mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
744 test -d $(distdir)/_build || exit 0; \
745 dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
746 && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
747 && $(MAKE) $(AM_MAKEFLAGS) distcheck-hook \
749 && $(am__cd) $(distdir)/_build/sub \
751 $(AM_DISTCHECK_CONFIGURE_FLAGS) \
752 $(DISTCHECK_CONFIGURE_FLAGS) \
753 --srcdir=../.. --prefix="$$dc_install_base" \
754 && $(MAKE) $(AM_MAKEFLAGS) \
755 && $(MAKE) $(AM_MAKEFLAGS) $(AM_DISTCHECK_DVI_TARGET) \
756 && $(MAKE) $(AM_MAKEFLAGS) check \
757 && $(MAKE) $(AM_MAKEFLAGS) install \
758 && $(MAKE) $(AM_MAKEFLAGS) installcheck \
759 && $(MAKE) $(AM_MAKEFLAGS) uninstall \
760 && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
762 && chmod -R a-w "$$dc_install_base" \
764 (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
765 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
766 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
767 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
768 distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
769 } || { rm -rf "$$dc_destdir"; exit 1; }) \
770 && rm -rf "$$dc_destdir" \
771 && $(MAKE) $(AM_MAKEFLAGS) dist \
772 && rm -rf $(DIST_ARCHIVES) \
773 && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
776 $(am__post_remove_distdir)
777 @(echo "$(distdir) archives ready for distribution: "; \
778 list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
779 sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
781 @test -n '$(distuninstallcheck_dir)' || { \
782 echo 'ERROR: trying to run $@ with an empty' \
783 '$$(distuninstallcheck_dir)' >&2; \
786 $(am__cd) '$(distuninstallcheck_dir)' || { \
787 echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
790 test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
791 || { echo "ERROR: files left after uninstall:" ; \
792 if test -n "$(DESTDIR)"; then \
793 echo " (check DESTDIR support)"; \
795 $(distuninstallcheck_listfiles) ; \
797 distcleancheck: distclean
798 @if test '$(srcdir)' = . ; then \
799 echo "ERROR: distcleancheck can only run from a VPATH build" ; \
802 @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
803 || { echo "ERROR: files left in build directory after distclean:" ; \
804 $(distcleancheck_listfiles) ; \
807 check: check-recursive
808 all-am: Makefile $(DATA) config.h
809 installdirs: installdirs-recursive
811 for dir in "$(DESTDIR)$(m4datadir)" "$(DESTDIR)$(pkgconfigdir)"; do \
812 test -z "$$dir" || $(MKDIR_P) "$$dir"; \
814 install: install-recursive
815 install-exec: install-exec-recursive
816 install-data: install-data-recursive
817 uninstall: uninstall-recursive
820 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
822 installcheck: installcheck-recursive
824 if test -z '$(STRIP)'; then \
825 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
826 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
829 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
830 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
831 "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
838 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
839 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
841 maintainer-clean-generic:
842 @echo "This command is intended for maintainers to use"
843 @echo "it deletes files that may require special tools to rebuild."
844 clean: clean-recursive
846 clean-am: clean-generic clean-libtool mostlyclean-am
848 distclean: distclean-recursive
849 -rm -f $(am__CONFIG_DISTCLEAN_FILES)
851 distclean-am: clean-am distclean-generic distclean-hdr \
852 distclean-libtool distclean-tags
866 install-data-am: install-m4dataDATA install-pkgconfigDATA
868 install-dvi: install-dvi-recursive
874 install-html: install-html-recursive
878 install-info: install-info-recursive
884 install-pdf: install-pdf-recursive
888 install-ps: install-ps-recursive
894 maintainer-clean: maintainer-clean-recursive
895 -rm -f $(am__CONFIG_DISTCLEAN_FILES)
896 -rm -rf $(top_srcdir)/autom4te.cache
898 maintainer-clean-am: distclean-am maintainer-clean-generic
900 mostlyclean: mostlyclean-recursive
902 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
912 uninstall-am: uninstall-m4dataDATA uninstall-pkgconfigDATA
914 .MAKE: $(am__recursive_targets) all install-am install-strip
916 .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
917 am--refresh check check-am clean clean-cscope clean-generic \
918 clean-libtool cscope cscopelist-am ctags ctags-am dist \
919 dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \
920 dist-tarZ dist-xz dist-zip dist-zstd distcheck distclean \
921 distclean-generic distclean-hdr distclean-libtool \
922 distclean-tags distcleancheck distdir distuninstallcheck dvi \
923 dvi-am html html-am info info-am install install-am \
924 install-data install-data-am install-dvi install-dvi-am \
925 install-exec install-exec-am install-html install-html-am \
926 install-info install-info-am install-m4dataDATA install-man \
927 install-pdf install-pdf-am install-pkgconfigDATA install-ps \
928 install-ps-am install-strip installcheck installcheck-am \
929 installdirs installdirs-am maintainer-clean \
930 maintainer-clean-generic mostlyclean mostlyclean-generic \
931 mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
932 uninstall-am uninstall-m4dataDATA uninstall-pkgconfigDATA
938 for item in $(EXTRA_DIST); do \
939 if test -d $$item; then \
940 echo -n "cleaning dir $$item for distribution..."; \
941 rm -rf `find $(distdir)/$$item -name .svn`; \
946 $(RM) -rf $(cmake_builddir)
947 mkdir $(cmake_builddir)
948 cd $(cmake_builddir) && cmake ../$(top_distdir)
949 cd $(cmake_builddir) && cmake --build .
950 cd $(cmake_builddir) && ctest
951 $(RM) -rf $(cmake_builddir)
954 $(MAKE) all CFLAGS="@DEBUG@"
957 $(MAKE) all CFLAGS="@PROFILE@"
959 # Tell versions [3.59,3.63) of GNU make to not export all variables.
960 # Otherwise a system limit (for SysV at least) may be exceeded.